Welding table PLUS Grid - 100x100mm, System - Φ28, Size - 2000x1000mm, Legs - On feet

Welding table PLUS Size - 2000x1000mm, Grid - 100x100mm, System - Φ28, Legs - On feet - technical drawing

Welding table PLUS Grid - 100x100mm, System - Φ28, Size - 2000x1000mm

Welding table PLUS 2000 x 1000 mm

Description
Product Details

Welding tables can be used wherever there is a need for precision during welding. You will use it for manual or robotic welding. Your structures will be finally made precisely without needless corrections!

It ensures also ergonomic and quick work while maintaining the precision and repeatability of the executed structures.

The welding table must be flat! Worktops of the PLUS tables, having a thickness of 12 mm, have a dense ribbing, which has an impact on the flat working surface. A massive and rigid substructure of the worktop ensures the highest stability during use and protection against deformation. Tolerance on flatness for the whole table is ±0.3 mm*. The 2000x1000 mm table has 2 lengthwise rib and 4 widthwise ribs.

This description applies to the product Welding Table PLUS 2000x1000mm with the holes of system φ28, grid 100x100mm:

This is the most versatile system. You will mainly use it for larger, heavier welded structures, but it will work well for any type of work.

fi 28mm in diagonal mesh - this is a system you will also use for larger, heavier constructions, one with greater toolholding capabilities,
fi 16mm in 100x100mm grid - you will use it for lighter and more precise work and smaller constructions. It is most often chosen as a base for robotic welding stations,
fi 16mm in 50x50mm mesh - you will use it for similar applications as the system above, but with greater workstation ergonomics and the possibility of fixing tools in more places.

You decide!

This description applies to the product: Welding Table PLUS 2000x1000mm with the holes of system φ28, grid 100x100mm, with legs on feet.

Bevelled and milled openings in the worktop ensure easy assembly and disassembly of the jigs and fixtures during the work thanks to the appropriate fit of the holes to the tools. It contributes also to smaller wear and tear - you don’t need much force to install and remove them. Such execution is the best solution available on the market of Welding Tables! The tolerance of execution of the holes of the welding table is ±0.05 mm.

The engraved scale of the worktop includes vertical and horizontal lines in the grid of 100x100mm. It is a reference point for positioning the structure and during the assembly of the jigs and fixtures. Using measuring tools, you can correctly set your structure to obtain the required dimension.

The engraved scale of the worktop PLUS

Legs in the PLUS welding tables, made of 80x80mm section, have a load capacity of 500 kg/leg. In the case of 3000x1480 mm version, which has eight 8 legs, you will get a maximum load capacity of 4 000 kg.

You have a choice: leg with feet or on the wheel - check which version will be better for you!

Load capacity of the PLUS table leg

You will use the PLUS milled tools on the PLUS series welding tables. Thanks to them you will precisely execute any flat 2D structure and 3D structure. And it’s all in a much shorter time!

Your current configuration includes: Welding table PLUS 2000x1000mm with the holes of system φ28, grid 100x100mm, with legs on feet.

*provided the table is correctly levelled.

Reference 28_100x100_S_TWT_PLUS_200x100

Data sheet