PLUS 12mm

Welding Table PLUS - a rigid base for flat and spatial structures

The Welding Table PLUS at GPPH costs from €901.00 to €3,536.00 and provides a rigid, precise surface for repeatable positioning and clamping of flat and spatial structures. The PLUS series is well suited to regular assembly and welding work where precise workpiece positioning, efficient tool setup, and fewer corrections are important.

Why does the design of the PLUS table make repeatable workpiece positioning easier?

The 12 mm thick S355J2+N steel tabletop, reinforced with ribs, creates a stable base for positioning and clamping components. Once properly levelled, the declared flatness of the table is up to 0.15 mm across the entire surface, making it easier to maintain repeatable workpiece positioning.

Milled and chamfered holes make it easier to position clamping elements, while the 100x100 mm grid helps reproduce previous setups. In the broader range welding tables other GPPH series are also available.

GPPH advises: Before positioning the workpiece, level the PLUS table and check the support points. Correct setup allows you to make use of the rigidity of the 12 mm tabletop and maintain repeatable positioning.

How can the PLUS hole system be used for flat and spatial structures?

Choose the Ø16 or Ø28 system according to the clamping elements you use and the typical workpieces. Depending on the variant, a 50x50 mm, 100x100 mm or diagonal grid is used, while three rows of holes in the side walls increase the positioning possibilities along the edges of the table.

When selecting Tools for Welding Tables and welding clamps, maintain compatibility with the hole system. Depending on the configuration, the PLUS table can have legs with feet or wheels.

PLUS tables feature a 12 mm tabletop, an Ø16 or Ø28 system, and three rows of holes in the side walls. Choose the variant according to the type of structure and workstation organization.

Frequently Asked Questions

What types of structures is the Welding Table PLUS suitable for?

The PLUS series is suitable for flat and spatial structures where repeatable positioning and stable clamping are important.

Is the Welding Table PLUS available in Ø16 and Ø28 systems?

Yes, PLUS welding tables are available in Ø16 or Ø28 systems, and the hole grid layout depends on the selected PLUS table variant.

How thick is the tabletop of the PLUS welding table?

The PLUS table has a 12 mm thick tabletop, and its rib-reinforced construction supports surface rigidity during assembly and welding.