Description
Welding table PLUS 2000×1000 mm – elongated workstation for larger structures
The two-metre length makes the welding table PLUS 2000×1000 mm particularly well suited to profiles, beams and elongated frames. S355J2+N steel and reinforcing ribs create a stable base along the entire workpiece, while the milled and chamfered holes and scale help organize several working points spaced apart from one another.
Welding tabletop 2000×1000 mm for long components
The 2000 mm length allows profiles, beams, frames and other elongated structures to be positioned on a single work surface. At the same time, the 1000 mm width leaves room for tooling and additional components needed when preparing the structure for welding.
A welding table measuring 2000×1000 mm is well suited to tasks where a shorter tabletop would require repositioning the workpiece or splitting the work between several stations. The elongated work surface makes it easier to plan the position of the structure along its full length and maintain access to successive work areas.
S355J2+N steel construction for working with long components
With a two-metre length, the entire workpiece being prepared can remain on a single work surface. The welding tabletop is made of S355J2+N steel, and the 2000×1000 mm format provides space for positioning profiles, beams and frames along the workstation.
Internal ribs support the long tabletop from below. This allows different areas of the surface to serve as support and clamping points for the same structure.
GPPH advises: do not concentrate all support points only at the ends of a long structure. The 2000×1000 mm surface provides room to distribute clamping points across several zones while leaving space for tooling between them.
Mounting holes for clamping at multiple points
A long workpiece rarely requires stabilization at only one point. The milled and chamfered holes distributed along the work surface allow the tooling position to be adapted to successive sections of the structure.
If the length or geometry of the workpiece changes, the clamping points can also be repositioned accordingly. The workstation remains flexible despite its clearly elongated format.
Load capacity of the welding table PLUS
Each welding table PLUS variant offers a load capacity of up to 750 kg per leg. This makes the workstation suitable also for working with heavier components and higher loads.
Engraved scale on a long work surface
When a structure extends across a large part of the two-metre length, it is important to maintain the relationship between its beginning, middle and end. The engraved markings create a common reference scale on the tabletop for these widely separated areas.
When producing similar frames or profiles, characteristic positioning points can later be found again on the same work surface. This is particularly practical for setups involving several stabilization points.
Welding table PLUS 2000×1000 mm parameters
- work surface 2000×1000 mm,
- tabletop made of S355J2+N steel,
- construction reinforced with stiffening ribs,
- milled and chamfered mounting holes,
- engraved scale supporting positioning control,
- elongated format for profiles, frames and long structures,
- possibility to arrange multiple clamping points,
- space for the workpiece and tooling at a single workstation.
For long structures, the PLUS 2000×1000 mm reduces the need to reposition the workpiece between successive positioning and clamping stages. Choose the 2000×1000 mm size from the PLUS series for profiles, beams and frames that require greater working length.
Frequently Asked Questions
Can a long workpiece be prepared on the PLUS 2000×1000 mm without repositioning it?
For structures that fit within the work surface, the 2000 mm length allows the preparation process to be carried out at a single workstation.
Why are several support points useful for long components?
They allow the structure to be stabilized over a greater length instead of concentrating the support only at its ends.
Does the 1000 mm width leave enough room for tools?
Yes, with typical elongated structures, there is still space beside the workpiece for tooling and additional components.
une table de très bonne qualité avec une finition parfaite.
Une fois réglée la planéité est parfaite.
Les pieds sur roulettes représentent une option très interessante qui permet de déplacer très facilement cette lourde table.