Description
Welding Table PRO 1000x600mm – compact format for precision work
Welding Table PRO 1000x600mm by GPPH features a worktop made of 15mm-thick S355J2+N steel, reinforced with ribs and manufactured with a flatness tolerance of ≤0.15mm. It is ideal when limited workspace makes it difficult to position and precisely clamp smaller components during welding and assembly.
Compact 1000x600mm work surface for smaller structures
The 1000x600mm worktop provides space for assembling brackets, supports, small frames, bases and shorter profile sections without taking up a large part of the workstation. The 1000mm length allows several clamping points to be positioned along the workpiece, while the 600mm width makes it easier to access the central part of the work surface.
The 1000x600mm format is particularly suitable for smaller structures where workshop space is limited. The 15mm-thick welding tabletop provides a stable base for positioning components when a standard workbench does not offer sufficient flatness or the ability to use system clamping tools.
PRO 1000x600mm can serve as the main workstation for small components or as an additional work surface next to a larger table. This solution allows smaller assemblies to be prepared independently of larger structures located at the other workstation.
S355J2+N steel and 15mm worktop for stable positioning
The PRO 1000x600mm features a 15mm worktop made of S355J2+N steel. Its underside is reinforced with a system of ribs, allowing the compact work surface to provide a stable base when clamping profiles, flat bars and other components prepared for welding.
Across the entire worktop surface, the manufacturer specifies a flatness tolerance of ≤0.15mm. When working with smaller components, a flat base helps position several elements relative to a single plane and reduces the impact of workstation unevenness on the geometry of the assembled structure.
- milling and chamfering of the holes prepares their edges for use with clamping tools,
- ±0.05mm hole manufacturing tolerance helps maintain the accuracy required when repositioning tooling,
- when positioning components, the engraved 100x100mm scale can be used as a fixed reference system,
- the rigidity of the work surface is increased by rib reinforcement,
- the workstation base is formed by legs made of 100x100x4mm profiles,
- each leg has a load capacity of 1000kg, allowing the weight of the components to be properly distributed across the table structure.
GPPH recommends: Start assembling a small frame by defining two reference points using the 100x100mm scale. Clamp the remaining components only after checking the initial setup to make it easier to maintain the required dimensions before welding.
Maximum table load capacity up to 4000kg
The compact dimensions of the PRO 1000x600mm do not mean limited load capacity. The table is supported by 4 legs made of 100x100x4mm profiles, each providing a load capacity of up to 1000kg. With the load properly and evenly distributed, this gives the table a maximum load capacity of up to 4000kg.
This allows the compact work surface to also be used with heavy components and structures, provided their weight is properly distributed across the worktop and support points.
Welding Table PRO 1000x600mm Specifications
- worktop dimensions: 1000x600mm – compact surface for smaller structures,
- worktop thickness: 15mm – stable base for clamping and assembling components,
- material: S355J2+N steel – structural material used in the PRO series,
- flatness tolerance: ≤0.15mm – precise surface for positioning components,
- holes: milled and chamfered – more convenient use of clamping tools,
- hole manufacturing tolerance: ±0.05mm – repeatable positioning of tooling,
- engraved scale: 100x100mm – helps with positioning and checking the location of components,
- reinforcement: rib system beneath the worktop – increased structural rigidity,
- leg profile: 100x100x4mm – stable support for the work surface,
- load capacity: 1000kg per leg – suitable for working with heavier components when the load is evenly distributed.
The 15mm worktop, flatness of ≤0.15mm and holes manufactured with a tolerance of ±0.05mm provide a precise base for regular welding and assembly work. PRO 1000x600mm is ideal when the priority is a compact workstation for precise positioning and clamping of smaller components.
Frequently Asked Questions
How much space does the PRO 1000x600mm work surface take up?
The worktop measures 1000x600mm, allowing you to create a fully functional workstation for smaller components without taking up the space required by larger formats.
Can previous clamping setups be recreated on the 1000x600mm worktop?
Yes, the engraved 100x100mm scale and hole system help record and reuse the positions of reference points and tooling.
What does a flatness tolerance of ≤0.15mm provide when working with smaller structures?
A flat surface reduces the influence of the workstation itself on component positioning and makes it easier to align several elements relative to a single plane.
Opinie
Nie ma jeszcze żadnych recenzji