Welding table PLUS 1000 x 600 mm

Add to wishlist
Size : 1000x600mm
Hole system : Φ28
Grid : 100x100mm
Legs : On feet
€1,060.00
3

Welding tables can be used wherever there is a need for precision during welding. You will use it for manual or robotic welding. Your structures will be finally made precisely without needless corrections!

It ensures also ergonomic and quick work while maintaining the precision and repeatability of the executed structures.

The welding table must be flat! Worktops of the PLUS tables, having a thickness of 12 mm, have a dense ribbing, which has an impact on the flat working surface. A massive and rigid substructure of the worktop ensures the highest stability during use and protection against deformation. Tolerance on flatness for the whole table is ±0.3 mm* The 1000x600 mm table has 1 lengthwise rib and 2 widthwise ribs.

Thickness of the Welding tabletop PLUSWelding table ribbing 1000x600

This description applies to the product Welding Table PLUS with the holes of system , grid :

---

You decide!

Grid 100x100mm, system fi28Grid 100x100mm, system fi16
Diagonal grid, system fi28Diagonal grid, system fi28
Grid 50x50 mm, system fi16

This description applies to the product: Welding Table PLUS with the holes of system  , grid , with legs .

Bevelled and milled openings in the worktop ensure easy assembly and disassembly of the jigs and fixtures during the work thanks to the appropriate fit of the holes to the tools. It contributes also to smaller wear and tear - you don’t need much force to install and remove them. Such execution is the best solution available on the market of Welding Tables! The tolerance of execution of the holes of the welding table is ±0.05 mm.

The engraved scale of the worktop includes vertical and horizontal lines in the grid of 100x100mm. It is a reference point for positioning the structure and during the assembly of the jigs and fixtures. Using measuring tools, you can correctly set your structure to obtain the required dimension.

The engraved scale of the worktop PLUS

Legs in the PLUS welding tables, made of 80x80mm section, have a load capacity of 500 kg/leg. In the case of 3000x1480 mm version, which has eight 8 legs, you will get a maximum load capacity of 4 000 kg.


You have a choice: leg with feet or on the wheel - check which version will be better for you!

Load capacity of the PLUS table leg

You will use the PLUS milled tools on the PLUS series welding tables. Thanks to them you will precisely execute any flat 2D structure and 3D structure. And it’s all in a much shorter time!

Your current configuration includes: Welding table PLUS with the holes of system , grid , with legs .

*provided the table is correctly levelled.

28_100x100_S_TWT_PLUS_100x60

Data sheet

Thickness of the tabletop
12 mm
Load capacity
500kg / leg
Holes
chamfered and milled
Engraved scale
yes, 100x100 mm grid
Reinforcement with ribs
yes
Leg profile
80x80x4 mm
Series
PLUS
Tolerance on flatness for table (on the whole worktop)
±0,3 mm
Holes manufacturing tolerance
±0,05 mm

Specific References

ean13
5904473253718