Welding Table PLUS 12 mm – 1200 x 1200 mm

Description

Welding table PLUS 1200×1200 mm – square work surface for flexible workflow organization

The square geometry is the main functional feature of the GPPH PLUS 1200×1200 mm welding table. The S355J2+N steel tabletop, supported by ribs, can be used evenly in both directions, while the milled and chamfered holes together with the engraved scale help organize clamping around the workpiece.

Square 1200×1200 mm work surface for various structures

The 1200×1200 mm welding tabletop provides equal length and width across the work surface, making it well suited to frames, welded assemblies and structures that occupy a similar amount of space in both directions. The square format allows the workpiece orientation to be changed without organizing the workstation around a single dominant axis.

A 1200×1200 mm welding table can be particularly useful for components that require regular access from several sides. The greater width compared with rectangular variants provides more space for the structure, clamping tools and support points arranged around the workpiece.

S355J2+N material for regular clamping of components

For structures positioned centrally or clamped from several sides, different areas of the work surface are used. The tabletop is made of S355J2+N steel, while the square 1200×1200 mm format allows clamping to be freely arranged around the workpiece.

The square work area is additionally supported from below by reinforcing ribs. This allows different parts of the tabletop to be used as equivalent zones for positioning and clamping.

GPPH advises: a square work surface offers the greatest benefit when the structure genuinely requires a comparable amount of space in both directions. With mainly elongated workpieces, part of the 1200 mm width may remain unused.

Mounting holes for multi-directional configurations

With the 1200×1200 mm format, the tooling does not have to be arranged along a single dominant axis. The milled and chamfered holes create a network of mounting points across the square surface that can be accessed from different directions.

With this layout, the structure can be surrounded by clamping points according to its shape. The square tabletop therefore remains functional even when the orientation of the frame or assembly changes.

Load capacity of the welding table PLUS

Each welding table PLUS variant offers a load capacity of up to 750 kg per leg. This makes the workstation suitable also for working with heavier components and higher loads.

Engraved scale for checking position along both axes

The engraved scale divides the square surface into a clear reference system that can be used regardless of the workpiece orientation. This is particularly practical for frames and assemblies that occupy a similar amount of space in both directions.

If the structure needs to be prepared again, the markings make it easier to locate the previous positions of individual components. Recreating the configuration therefore does not have to rely solely on memory or additional markings.

Welding table PLUS 1200×1200 mm parameters

• square work surface 1200×1200 mm,
• tabletop made of S355J2+N steel,
• construction reinforced with stiffening ribs,
• milled and chamfered mounting holes,
• engraved scale supporting positioning,
• possibility to create clamping layouts in multiple directions,
• format suitable for working with access to the workpiece from multiple sides.

Equal length and width allow the PLUS 1200×1200 mm to make efficient use of space when working with structures that require access and clamping from several sides. Choose the PLUS 1200×1200 mm for work where access and clamping arrangements are equally important along both axes.

Frequently Asked Questions

Does the 1200×1200 mm format offer an advantage for centrally positioned structures?
Yes, a similar amount of space around the workpiece makes it easier to arrange tooling on several sides.

For which components is a square format not the best choice?
For very long and narrow workpieces, a variant with significantly greater length than width may be more suitable.

Is the PLUS tabletop just a steel plate for a welding table?
No. The S355J2+N steel work surface works together with reinforcing ribs, a system of milled and chamfered mounting holes, and an engraved scale. In the 1200×1200 mm variant, the square format also makes it easier to organize clamping in different directions.