Description
Welding table SMART 12mm 2000x1000mm – two-meter work surface for elongated structures
The main distinguishing feature of the GPPH SMART 12mm 2000x1000mm welding table is its two-meter working length, which provides space for profiles, frames, and assemblies requiring several widely spaced support points. The S355J2+N steel work surface is complemented by reinforcing ribs, milled and chamfered holes, and an engraved scale that supports work organization.
2000x1000mm surface for longer components
The 2000x1000mm tabletop offers 2m² of work surface designed for elongated frames, railings, structures, bases, and constructions made from longer profiles. The 2000mm length allows several support points to be spaced out without frequently repositioning the workpiece during subsequent stages of work.
The 1000mm width allows you to comfortably reach the central part of the tabletop from both longer sides. These proportions are particularly suited to structures extending in one direction and do not require increasing the workstation depth to the dimensions of wider tables.
On the SMART 12mm 2000x1000mm work surface, you can prepare one longer structure or several smaller components arranged along the tabletop. The workstation can be adapted to the current job and the selected tooling configuration.
S355J2+N steel and support for the two-meter tabletop
The tabletop is made of S355J2+N steel and has a thickness of 12mm. The surface is designed for regular positioning, securing, and joining of components during welding and assembly work.
Along the entire length of the tabletop, its structure is supported by a system of reinforcing ribs. This is particularly important for parts clamped at widely spaced points and for frames occupying most of the two-meter working axis.
GPPH recommends: when working with structures made from long profiles, first level the table along the 2000mm axis, then check the alignment in the transverse direction. Checking the surface at several points helps maintain the correct geometry of the frame being prepared.
Mounting holes arranged along the structure
A long profile or frame can be stabilized at several sections of the 2000x1000mm work surface. This is enabled by milled and chamfered holes, which can accommodate clamps, angle brackets, stops, and other appropriately selected clamping tools.
The number and position of clamping points can be adjusted to the length of the current workpiece. Shorter components occupy only a selected part of the workstation, while a longer frame can be supported closer to both ends and additionally secured in the central section.
SMART 12mm 2000x1000mm is available in the Ø16 or Ø28 system and with a 100x100mm grid or diagonal layout. The hole pattern can be selected according to the geometry of the parts being produced: the 100x100mm configuration organizes regular spacing, while the diagonal variant adds points useful for clamping angled components.
Load capacity of the SMART 12mm welding table
SMART 12mm 2000x1000mm provides a maximum load capacity of 2000kg, calculated for the entire table. When working with long components, the load should be evenly distributed along the tabletop surface.
Engraved scale along the 2000mm surface
Along the two-meter work surface runs an engraved 100x100mm scale, which helps organize the position of profiles, frames, and tooling elements. A single reference layout across the entire tabletop makes it easier to control points located farther apart from one another.
The markings also make it easier to recreate a similar configuration. Previously used positions of stops, angle brackets, and reference points can be found more easily without having to define the entire layout from scratch.
The scale is intended for initial positioning of components, while the final dimensions and geometry of the structure should be checked using appropriate measuring tools.
Side walls for clamping elongated components
Additional locations for mounting tooling are available on the side surfaces of SMART 12mm. The two rows of mounting holes placed there can be used for supporting the ends of profiles, positioning vertical parts, and preparing three-dimensional structures.
Thanks to the side clamping points, the 2000mm length can be used for more than just assembling flat frames. The workpiece can be positioned relative to the edge of the table, and the tools can be selected according to its height and geometry.
Parameters of the SMART 12mm 2000x1000mm welding table
- work surface 2000x1000mm, i.e. 2m²,
- tabletop made of 12mm thick S355J2+N steel,
- structure reinforced with stiffening ribs,
- maximum load capacity of 2000kg for the entire table,
- tabletop flatness tolerance ≤0.3mm after proper leveling,
- hole system Ø16 or Ø28,
- hole grid 100x100mm or diagonal layout,
- milled and chamfered mounting holes,
- engraved 100x100mm scale,
- two rows of holes in the side walls,
- legs made of 60x60x4mm profile,
- choice of legs with feet or wheels,
- compatibility with the appropriate SMART and PLUS tools.
The two-meter SMART 12mm 2000x1000mm work surface provides space for elongated workpieces and several widely spaced clamping points. Choose this size when greater working length combined with convenient access from both sides of the workstation is the priority.
Frequently Asked Questions
Can the 2m² surface be used to prepare several components?
Yes. You can arrange several smaller workpieces or create separate work areas on the tabletop, adapting the clamping layout to the current task.
How can a long profile be stabilized on SMART 12mm 2000x1000mm?
The 2000mm length allows clamping points to be positioned in several locations, including closer to both ends of the profile and in its central section.
What is the scale on the two-meter tabletop used for?
The engraved 100x100mm scale creates clear reference points that make it easier to organize the placement of workpieces and recreate a similar working layout.
Opinie
Nie ma jeszcze żadnych recenzji