Welding Table SMART 12mm – 1500x1480mm

Description

Welding table SMART 12mm 1500x1480mm – flexible clamping on an almost square surface

The similar length and width of the SMART 12mm 1500x1480mm welding table allow the clamping layout to be developed in both directions across the work surface. The 12mm thick steel tabletop, rib reinforcement, prepared mounting holes, and engraved scale create an economical workstation for working with wider frames and three-dimensional structures.

1500x1480mm welding tabletop for working in both directions

The 1500x1480mm tabletop provides a similar amount of space along both its length and width. The absence of a clearly dominant working axis makes it easier to position frames, bases, structures, and assemblies whose elements extend in several directions.

The almost square work surface allows you to choose the orientation of the workpiece more freely. The structure can be positioned relative to the selected side of the table, taking into account the assembly sequence, available clamping points, and the space required by the operator.

SMART 12mm 1500x1480mm works particularly well when a length of 1500mm is sufficient, but greater depth than in the 1500x1000mm variant is needed. The additional space makes it easier to arrange tooling around wider structures without overcrowding the clamping points.

S355J2+N steel and rib reinforcement of the wide tabletop

The work surface is formed by a 12mm thick S355J2+N steel tabletop. It provides a base for regular positioning, clamping, and joining of components during everyday welding and assembly work.

Support for the wide tabletop is provided by a system of reinforcing ribs positioned underneath its surface. This solution supports rigidity both for parts positioned centrally and for frames occupying a significant portion of the 1480mm width.

GPPH recommends: before choosing the 1500x1480mm variant, check whether your workshop layout allows access to at least several sides of the table. The almost square format offers the greatest flexibility when the work surface can be used in both directions, rather than from only one side.

Mounting holes on the 1500x1480mm surface

On the almost square surface, clamping points are available both along and across the tabletop. The milled and chamfered holes allow the use of clamps, angle brackets, stops, and pins according to the geometry of the workpiece being prepared.

Changing the orientation of the structure does not require the tooling to be assigned to a single workstation axis. The clamping layout can be reconfigured and another part of the work surface can be used for the next task.

SMART 12mm 1500x1480mm is available in the Ø16 or Ø28 system. The 100x100mm grid is suited to regular setups and repeatable spacing, while the diagonal layout expands the possibilities for clamping parts positioned at an angle.

Load capacity of the SMART 12mm welding table

The entire SMART 12mm 1500x1480mm table can be loaded up to a maximum of 2000kg. The weight of the structure, tools, and other equipment should be evenly distributed across the work surface.

Engraved scale for positioning in two axes

The layout of engraved lines spaced every 100mm organizes the almost square surface and creates clear reference points along both axes of the tabletop. This helps with the initial positioning of frames, profiles, and clamping elements.

The scale also makes it easier to rotate the workpiece, add further components, and recreate a previously used configuration. The position of the structure can be referenced to specific lines and clamping points.

The engraved scale supports initial positioning, but it does not replace precise measuring tools. When preparing frames and three-dimensional assemblies, their dimensions, angles, and diagonals should still be checked.

Side walls for three-dimensional structures

Clamping options beyond the work surface are provided by side walls equipped with two rows of holes. They can be used for positioning vertical parts, supporting profiles, and building setups that extend beyond the plane of the tabletop.

In the 1500x1480mm format, the side mounting points complement the wide work surface and increase its usefulness when preparing 3D structures. Tooling can be used both on the tabletop and relative to selected edges of the table.

Parameters of the SMART 12mm 1500x1480mm welding table

• almost square work surface 1500x1480mm,
• tabletop made of 12mm thick S355J2+N steel,
• structure reinforced with stiffening ribs,
• maximum load capacity of 2000kg for the entire table,
• tabletop flatness tolerance ≤0.3mm after proper leveling,
• hole system Ø16 or Ø28,
• hole grid 100x100mm or diagonal layout,
• milled and chamfered mounting holes,
• engraved 100x100mm scale,
• two rows of holes in the side walls,
• legs made of 60x60x4mm profile,
• choice of legs with feet or wheels,
• compatibility with the appropriate SMART and PLUS tools.

SMART 12mm 1500x1480mm allows you to organize the structure and tooling along both axes of the work surface. Choose this format for frames and assemblies that require greater depth and multiple clamping points arranged around the workpiece.

Frequently Asked Questions

Can the workpiece on SMART 12mm 1500x1480mm be positioned in different orientations?
Yes. The almost square proportions of the work surface allow the orientation of the structure to be changed depending on its geometry, assembly sequence, and tooling arrangement.

What can the side holes of SMART 12mm 1500x1480mm be used for?
Two rows of holes in the side walls allow components to be clamped beyond the main plane of the tabletop, including vertical parts and profiles of three-dimensional structures.

What distinguishes the 1500x1480mm variant from the 1500x1000mm variant?
The 1500x1480mm variant provides greater work surface depth, leaving more space for wide workpieces and clamping elements arranged along two axes.