Description
Welding table PLUS 3000×1480 mm – extensive workstation for large projects
The welding table PLUS 3000×1480 mm can serve as a central work surface for large, multi-component projects. The extensive S355J2+N steel tabletop is supported by a ribbed structure, while the distributed milled and chamfered holes and engraved reference system make it possible to organize several work areas in parallel.
Welding tabletop 3000×1480 mm for large projects
The 3000×1480 mm format provides the space needed to prepare large frames, spatial structures, welded assemblies and projects requiring a substantial work area in both directions. The 3000 mm length allows extensive components to be arranged without having to divide the structure across several smaller tabletops.
The 1480 mm width leaves room for tooling, support points and additional components needed during assembly. A welding table of this size can serve as a central workstation for projects that require several parts to be prepared at the same time.
S355J2+N steel and reinforcement of the extensive work surface
The largest format in this group allows the tabletop to function as an extensive workstation rather than just a single surface for one small workpiece. The welding tabletop is made of S355J2+N steel, while the 3000×1480 mm dimensions leave room for structures occupying a substantial part of both the table’s length and width.
With a 3000×1480 mm work surface, structural support is also important. The ribs located beneath the tabletop help maintain consistent working conditions across the individual areas used when preparing large assemblies.
GPPH advises: use the large work surface as several logical working areas instead of placing components randomly across the entire tabletop. Dividing the 3000×1480 mm workstation into zones can reduce the number of operations involving the movement of large parts.
Mounting holes for complex clamping configurations
Such a large work surface makes it possible to create several independent groups of clamping points within a single workstation. The milled and chamfered holes allow tooling to be positioned wherever the current structure layout requires it.
One part of the tabletop can be used to position the main assembly, while other areas can be used to prepare its subsequent components. When the project changes, the configuration can be rebuilt without having to preserve the previous layout.
Load capacity of the welding table PLUS
Each welding table PLUS variant offers a load capacity of up to 750 kg per leg. This makes the workstation suitable also for working with heavier components and higher loads.
Engraved scale for monitoring an extensive workstation
On a 3000 mm long work surface, different parts of an assembly can be positioned a considerable distance apart. The engraved layout on the tabletop provides a common reference for them and makes it easier to treat the entire workstation as one working area.
This is also useful when several parts of the structure are being prepared at the same time. The individual areas remain organized according to the same marking system.
Welding table PLUS 3000×1480 mm parameters
- work surface 3000×1480 mm,
- tabletop made of S355J2+N steel,
- construction reinforced with stiffening ribs,
- milled and chamfered mounting holes,
- engraved scale supporting positioning,
- extensive format for large and long structures,
- possibility to create complex multi-point clamping configurations,
- space for the workpiece, tooling and several working zones.
The 3000×1480 mm size allows a single table to function as an extensive workstation with space for the main structure, its components and several groups of clamping points. Choose the PLUS 3000×1480 mm size for projects that require a large tabletop and the parallel organization of several work areas.
Frequently Asked Questions
Can several parts of one structure be prepared simultaneously on the PLUS 3000×1480 mm?
Yes, the extensive work surface makes it possible to create separate areas for different components while keeping them within a single workstation.
When is a tabletop of this size practically justified?
When the structures being produced regularly require considerable length, substantial width, or many widely distributed clamping points.
How can the 3000×1480 mm surface be used most effectively?
It is worth dividing it in advance into functional areas for the main workpiece, subassemblies, clamping points and additional tooling.
Opinie
Nie ma jeszcze żadnych recenzji