GPPH welding tables with hydraulic lifting systems are professional tables with automatic adjustment of worktop height.
Thanks to it, you will quickly and easily reach the ideal working height of the table top, ensuring high working comfort.

Welding tables with hydraulic lifting systems are equipped with:

• overload valve preventing lifting too heavy loads;
• safety valve stopping the lowering in the case of rupture of the hydraulic lines;
• limit switches protecting against crushing or body injury.

Welding tables with hydraulic lifting system are available in five series of GPPH tabletops: PRO, PRO INOX, PLUS, PLUX INOX and ECO, and each of the series are available in 4 dimensions.

Each worktop is available with holes of system ϕ28 mm in the grids: 100x100 mm and diagonal, and in the holes of system ϕ16 mm in the grids: 50x50 mm, 100x100 mm and diagonal.

This offer applies to the welding table XWT with worktop PRO .

The welding table must be flat! Worktops of the PRO tables, having a thickness of 15mm, have a dense ribbing, which has an impact on the flat working surface. A massive and rigid substructure of the worktop ensures the highest stability during use and protection against deformation. Tolerance on flatness for the whole table is ±0.3 mm*.

Bevelled and milled openings in the worktop ensure easy assembly and disassembly of the jigs and fixtures during the work thanks to the appropriate fit of the holes to the tools. It contributes also to smaller wear and tear - you don’t need much force to install and remove them. Such execution is the best solution available on the market of Welding Tables! The tolerance of execution of the holes of the welding table is ±0.05 mm.

Technical parameters of the base with hydraulic lifting system:

• Supply voltage: 400 V
• Revolutions: 1400 rpm
• Protection class: IP54
• Insulation class: F

Technical parameters

• Max. load capacity [kg]: 3400
• Lifting time with a load [s]: 30-40
• Max. height of the table [mm]: 1550
• Min. height of the table [mm]: 550
• Dimensions of the lift base [mm]: 1863x890
• Motor power [kW]: 2.2