Are you looking for a welding table without side walls and the weight of your structures does not exceed 1500 kg? Welding table BASIC will meet your expectations and it is cost-efficient and will allow purchasing the additional jigs and fixtures without straining your budget.

The welding table must be flat! Worktops of the BASIC tables, having a thickness of 12 mm, have a dense ribbing, which has an impact on the flat working surface. Tolerance on flatness for the whole table is ±0.3 mm*. The 1200x800 mm table has 1 lengthwise rib and 2 widthwise ribs.

Welding table BASIC ensures ideal flatness of the working surface, which is resistant to deformations. This is due to a rigid and massive base having a height of 80mm. From now on your welded structures will be simple, repeatable and without any deformations.  

It doesn’t matter whether your welding works are made manually or you are using welding robots - the BASIC tables are a perfect choice!

This description applies to the product Welding table BASIC with the holes of system , grid :

You decide!

Your current configuration includes: Welding table BASIC with the holes of system , grid , with legs .

Bevelled and milled openings in the worktop ensure easy assembly and disassembly of the jigs and fixtures during the work thanks to the appropriate fit of the holes to the tools. It contributes also to smaller wear and tear - you don’t need much force to install and remove them. Such execution is the best solution available on the market of Welding Tables! The tolerance of execution of the holes of the welding table is ±0.05 mm.

The engraved scale of the worktop includes vertical and horizontal lines in the grid of 100x100mm. It is a reference point for positioning the structure and during the assembly of the jigs and fixtures. Using measuring tools, you can correctly set your structure to obtain the required dimension.

Where will you use the BASIC Welding Table? Wherever precision during welding is necessary . You can use it for manual or robotic welding. Your constructions finally they will be made precisely, without unnecessary corrections!

The welding table BASIC is ideal as a base for the robotic welding and measuring stations. Side walls are not used for such works so the Welding Table BASIC meets all the demands and is the most cost-efficient in comparison to the welding tables equipped with the side walls.

Legs are the basis! The legs of the welding table BASIC are made of a 60x60mm section with a wall thickness of 4 mm, which ensures a load capacity of 250kg per leg and makes the table structure stable and safe. 

You have a choice: a leg with a foot or a wheel - check which will be better for you!

For the BASIC series welding tables, you will use the “PLUS” milled tools. Thanks to them you will precisely execute any flat 2D structure and 3D structure. And it’s all in a much shorter time!

Your current configuration includes: Welding table BASIC , system , grid , with legs .

* provided the table is correctly levelled.