Welding Table PRO 15mm – 1200x1200mm

Description

Welding Table PRO 1200x1200mm – square work surface for larger structures

In the PRO 1200x1200mm Welding Table, the square work surface is made of 15mm S355J2+N steel, while the rib system provides additional rigidity to the worktop. The flatness tolerance of ≤0.15mm supports precise positioning of structures that occupy space along both axes. It is well suited when a wide frame, base or three-dimensional structure requires a similar amount of space in both directions and flexible arrangement of clamping tools.

Square 1200x1200mm work surface for wide structures

The 1200x1200mm worktop provides 1.44m² of working surface with equal length and width. This layout is well suited to wide frames, bases, structural sections, frameworks and assemblies that require plenty of space both along and across the workstation.

Równe wymiary obu boków ułatwiają rozmieszczenie narzędzi mocujących wokół detalu bez wyraźnego podporządkowania pracy jednej osi. Przy większych ramach można pozostawić więcej miejsca na stopery, kątowniki i zaciski po kilku stronach konstrukcji jednocześnie.

The 1200x1200mm welding worktop is also well suited to three-dimensional components that need to be rotated or positioned in different directions. The greater width reduces the need to move the workpiece simply to gain access to another clamping point.

15mm worktop and S355J2+N steel for stable positioning

15mm thickness and S355J2+N steel form the structural base of the square PRO 1200x1200mm worktop. The surface is reinforced with ribs underneath, helping to maintain adequate rigidity when clamping points are positioned far apart.

Every area of this worktop is subject to a flatness tolerance of ≤0.15mm. This is particularly important for wide structures supported at several points simultaneously, as all reference points use the same precise work surface.

• the milled and chamfered holes are prepared for use with the clamping system,
• their manufacturing accuracy is defined by a tolerance of ±0.05mm,
• the engraved 100x100mm grid provides a coordinate system useful when working along two axes,
• the larger square surface is stabilized from underneath by a rib system,
• the structural profile of the legs measures 100x100x4mm,
• the permissible load on a single leg is 1000kg, provided the weight is properly distributed.

GPPH recommends: Position the corners of the large square frame first, then compare both diagonals. Only after confirming the geometry should you clamp the sections between the corners.

Maximum table load capacity up to 4000kg

The compact dimensions of the PRO 1000x600mm do not mean limited load capacity. The table is supported by 4 legs made of 100x100x4mm profiles, each providing a load capacity of up to 1000kg. With the load properly and evenly distributed, this gives the table a maximum load capacity of up to 4000kg.

This allows the compact work surface to also be used with heavy components and structures, provided their weight is properly distributed across the worktop and support points.

Welding Table PRO 1200x1200mm Specifications

• worktop dimensions: 1200x1200mm – 1.44m² of square work surface for wide frames and three-dimensional structures,
• worktop thickness: 15mm – stable base for regular welding and assembly work,
• material: S355J2+N steel – structural material used in the PRO series,
• flatness tolerance: ≤0.15mm – precise work surface along both axes of the worktop,
• holes: milled and chamfered – easier positioning of system tools,
• hole manufacturing tolerance: ±0.05mm – repeatable positioning of tooling,
• engraved scale: 100x100mm – assists with positioning and checking the placement of workpieces,
• reinforcement: rib system beneath the worktop – increased structural rigidity,
• leg profile: 100x100x4mm – stable base for the workstation,
• load capacity: 1000kg per leg – suitable for working with heavier loads when the weight is evenly distributed.

The square 1200x1200mm worktop provides greater flexibility when working with structures extending in two directions, while flatness of ≤0.15mm ensures an even base for positioning them. The PRO 1200x1200mm format is worth considering for wide frames, bases and components that require easy access to clamping points from several sides.

Frequently Asked Questions

How much space for clamping tools does the 1200x1200mm work surface provide?

The worktop has an area of 1.44m², and its square proportions allow tooling to be positioned around the structure along both axes.

Is the PRO 1200x1200mm suitable for three-dimensional structures?

Yes, the large width and length make it easier to position components that extend in several directions and to change their orientation during work.

How can you check the geometry of a wide frame on this worktop?

After initially positioning the corners, it is worth checking the diagonals of the structure before increasing the clamping force and making the welds.