Welding tables can be used wherever there is a need for precision during welding. You will use it for manual or robotic welding. Your structures will be finally made precisely without needless corrections!

It ensures also ergonomic and quick work while maintaining the precision and repeatability of the executed structures.

The welding table must be flat! Worktops of the ECO tables, having a thickness of 8mm, have a dense ribbing, which has an impact on the flat working surface. A massive and rigid substructure of the worktop ensures the highest stability during use and protection against deformation. Tolerance on flatness for the whole table is ±0.5 mm* and the tolerance of the welding table holes is ±0.1 mm. The 1200x1000 mm table has 2 lengthwise rib and 2 widthwise ribs.

This description applies to the product Welding Table ECO with the holes of system , grid :

You decide!

This description applies to the product: Welding Table ECO with the holes of system  , grid , with legs .

The engraved scale of the worktop includes vertical and horizontal lines in the grid of 100x100mm. It is a reference point for positioning the structure and during the assembly of the jigs and fixtures. Using measuring tools, you can correctly set your structure to obtain the required dimension.

Legs in the ECO welding tables, made of 60x60mm section, have a load capacity of 250 kg/leg. In the case of 3000x1480 mm version, which has eight 8 legs, you will get a maximum load capacity of 2 000 kg.

You have a choice: leg with feet or on the wheel - check which version will be better for you!

To work on the ECO series welding tables, you will use milled PLUS tools, mounted using an adjustable mounting pin 19-22. Thanks to them you will precisely execute any flat 2D structure and 3D structure. And it’s all in a much shorter time!

Your current configuration includes: Welding table ECO with the holes of system , grid , with legs .

*provided the table is correctly levelled.