The grinding-welding station is intended for capturing and removing the dust and gases formed during grinding with a hand grinder or welding and metal working operations. The station may be used with an exhaust fan or fan-powered filter equipment.

The workstation base is adapted for the installation of guards and a top extraction system.

Each variant of the grinding-welding station consists of a working table with a worktop made of an 8 mm thick metal sheet.

Grinding-welding station is available in two-dimensional versions of the worktop:

• having the size of 1270x770 mm;
• having the size of 1870x770 mm.

Worktop has the assembly holes with holes of system ϕ28 mm with a 100x100 mm grid and additional holes for extraction of dust and gases.

Grinding-welding station with the covers is equipped with a back cover, while the variant with top extraction - the top extraction system. Both versions (with covers and top extraction) are equipped with tilting doors on the right and left - it allows positioning the items on the table which are longer than the width of the grinding-welding station.

Each SOG version is equipped with a connector ϕ 160 mm installed in the side surface of the extraction trough. The air may be exhausted from the bottom through the table of extraction trough. All types of grinding-welding stations are equipped with an extraction trough with drawers, two 230V power outlets for the connection of power tools and a system for the connection of the lighting of the working space.

For the welding and grinding stations GPPH you will use the PLUS series tools fixed with the adjustable bolt 19-22 ECO/PLUS.