Description
Welding table PLUS 1200×1000 mm – more space for positioning and clamping workpieces
The additional width distinguishes the GPPH PLUS 1200×1000 mm from narrower variants of a similar length. The S355J2+N steel tabletop provides more freedom to arrange the structure and tooling, while the reinforcing ribs, mounting hole system and engraved scale support the organization of a more extensive working layout.
Welding tabletop 1200×1000 mm for smaller and medium-sized structures
The 1200×1000 mm format provides more space than narrower variants, making it well suited to frames, brackets, welded assemblies and structures that require several clamping points. The additional width allows the workpiece and required tooling to be arranged more freely on a single work surface.
A 1200×1000 mm welding table maintains proportions that make workstation organization easier without taking up the space typically required by larger formats. This layout can be particularly suitable where greater freedom in positioning components is needed, but a very large tabletop is not necessary.
S355J2+N steel and construction designed for regular use
The greater tabletop width provides more options for arranging the frame and tooling. The welding tabletop is made of S355J2+N steel, and the 1200×1000 mm format leaves additional space on both sides of the structure being prepared.
Its performance is supported by the internal reinforcement of the tabletop. The rib system supports the work surface particularly when the clamping points are not arranged in a single line but distributed around different sides of the structure.
GPPH advises: if 1200×800 mm leaves too little space beside the workpiece, an additional 200 mm of width may be more useful than increasing the workstation length. Compare primarily the space required for tooling positioned along the sides of the structure.
Mounting holes for more extensive configurations
The additional space around the workpiece can be used to create more extensive clamping configurations. The milled and chamfered holes distributed across the tabletop allow this space to be used according to the current project.
When the structure changes, there is no need to keep the previous tooling layout. The support and clamping points can be moved wherever they are needed for the next workpiece.
Load capacity of the welding table PLUS
Each welding table PLUS variant offers a load capacity of up to 750 kg per leg. This makes the workstation suitable also for working with heavier components and higher loads.
Engraved scale for checking workpiece positioning
When several tools are positioned around the structure, maintaining a clear arrangement on the work surface becomes important. The engraved markings serve as fixed reference points for checking the position of the workpiece and tooling.
If a similar setup needs to be prepared again, previous positions can be more easily matched to the markings visible directly on the tabletop. This makes it easier to recreate the previous setup without relying entirely on additional measurements.
Welding table PLUS 1200×1000 mm parameters
- work surface 1200×1000 mm,
- tabletop made of S355J2+N steel,
- construction reinforced with stiffening ribs,
- milled and chamfered mounting holes,
- engraved scale supporting positioning control,
- possibility to create more extensive clamping configurations,
- format suitable for smaller and medium-sized structures.
PLUS 1200×1000 mm provides more space primarily around the structure, making it easier to arrange additional supports and tools. Choose the PLUS 1200×1000 mm when you need more room around the structure without opting for a large tabletop.
Frequently Asked Questions
When will the additional 200 mm of width compared with 1200×800 mm be useful?
When more space is needed beside the structure for stops, angle brackets, supports or other tooling components.
Is the PLUS 1200×1000 mm suitable for several clamping points around the workpiece?
Yes, the greater width makes it easier to arrange tools along the sides of the structure being prepared.
Can this format still be considered relatively compact?
Yes. It provides more working space but still does not reach the size of the largest workstations in the series.
Opinie
Nie ma jeszcze żadnych recenzji