Extension 500x200mm

Description

The GPPH 500x200mm extension, made of S355J2+N steel, is designed to locally increase the working surface of a welding table and features a single row of mounting holes. It is ideal when the workpiece extends beyond the tabletop and requires additional support, positioning, or stable clamping during welding and assembly.

Increasing the working surface for longer workpieces

The 500x200mm extension allows you to increase the working surface exactly where additional support for the workpiece is needed. This solution is particularly useful when working with profiles, frames, pipes, and components whose length exceeds the dimensions of the standard tabletop.

The 200mm width provides additional working surface without taking up space with a separate table or additional workstation. The 500mm length is ideal for locally extending a specific part of the workstation when a larger extension is not required.

The extension can be used for:

• supporting workpieces extending beyond the edge of the tabletop,
• increasing the space for positioning workpieces,
• clamping longer profiles and structures,
• extending the workstation only on the selected side of the table,
• creating an additional working surface during assembly.

S355J2+N steel and variants matched to the table series

The GPPH extension is made of S355J2+N steel, which is also used in the construction of welding tables. The material provides adequate rigidity when pressing, positioning, and clamping workpieces.

The thickness of the extension depends on the table series:

• ECO – 8mm, matched to the construction of ECO tables,
• PLUS – 12mm, matched to the PLUS series,
• PRO – 15mm, designed for PRO tables,
• EXPERT – 25mm, matched to the EXPERT series.

Selecting the appropriate variant ensures consistent working surface height and mounting system geometry.

GPPH recommends: Before choosing an extension, check the table series and the thickness of its tabletop. Selecting the correct variant helps maintain a single, level working surface after the extension is installed.

Technical specifications of the 500x200mm extension

• dimensions: 500x200mm – compact format for locally extending the working area,
• material: S355J2+N steel – provides the rigidity required for clamping and positioning,
• 1 row of mounting holes – allows the use of system clamping elements,
• ECO thickness: 8mm – matched to ECO series tables,
• PLUS thickness: 12mm – matched to PLUS series tables,
• PRO thickness: 15mm – matched to PRO series tables,
• EXPERT thickness: 25mm – matched to EXPERT series tables.

Horizontal mounting and vertical use

Przedłużenie 500x200mm może zostać zamontowane do bocznej ściany stołu i pełnić funkcję dodatkowej powierzchni roboczej. Mocowanie za pomocą śrub stabilizuje połączenie i pozwala wykorzystać element jako przedłużenie podstawowego blatu.

The extension can also be used in a vertical position. Vertical positioning is useful when building three-dimensional structures, positioning workpieces at an angle, and creating an additional clamping surface beyond the main tabletop.

The 500x200mm extension increases the working surface by an additional 500mm in length at a width of 200mm and allows you to extend the workstation exactly where additional support is needed. Add the variant matched to your GPPH table series to the cart.

Frequently Asked Questions

Do czego służy przedłużenie 500x200mm?

500x200mm zwiększa lokalnie powierzchnię stołu i zapewnia dodatkowe miejsce do podparcia, pozycjonowania oraz mocowania detali.

Czy przedłużenie 500x200mm pasuje do każdego stołu GPPH?

The extension is available in ECO, PLUS, PRO, and EXPERT versions with thicknesses of 8, 12, 15, and 25mm respectively, matched to specific table series.

Czy przedłużenie 500x200mm można zamontować pionowo?

Tak, przedłużenie 500x200mm może pracować pionowo jako dodatkowa powierzchnia do mocowania i budowy konstrukcji przestrzennych.