Description
Welding Table PRO 1200x800mm – extended worktop for profiles and frames
Welding Table PRO 1200x800mm by GPPH features a worktop made of 15mm-thick S355J2+N steel, manufactured with a flatness tolerance of ≤0.15mm and reinforced with ribs underneath. It is ideal when longer profiles, narrow frames and elongated components require stable support and several clamping points in a single setup.
1200x800mm work surface for profiles and elongated structures
The proportions of the 1200x800mm worktop provide more space along the main working axis than the 1000mm variants. The 1200mm length allows for greater spacing between the outermost clamping points, making it easier to position profiles, brackets, narrow frames, frameworks and other elongated components.
The 800mm width also leaves space for clamping tools on both sides of the workpiece without creating an excessively deep workstation. These proportions are well suited to tasks where the length of the structure is more important than an extensive work surface along the transverse axis.
The 1200x800mm welding worktop can therefore serve as a practical workstation for the repetitive preparation of similar components. Several reference points can be arranged along the 1200mm length, reducing the need to move the profile and reposition it between successive operations.
PRO construction with a 15mm S355J2+N steel worktop
In the 1200x800mm variant, the work surface consists of a 15mm-thick S355J2+N steel plate. Ribs positioned underneath the worktop increase its rigidity, which is particularly useful when clamping points are spaced farther apart along the 1200mm length.
Long profiles and other components can be positioned on a surface manufactured with a flatness tolerance of ≤0.15mm. This provides the workpiece with an even base before clamps, stops and other clamping tools are applied.
- milled and chamfered hole edges simplify the installation and removal of system tooling,
- the value of ±0.05mm defines the manufacturing tolerance of the holes used as clamping points,
- the positioning of subsequent components along the profile can be controlled using the engraved 100x100mm grid,
- beneath the worktop is a rib system that provides additional rigidity to the surface,
- the workstation legs are made of 100x100x4mm profiles,
- 1000kg per leg allows heavier loads to be distributed between the table’s support points.
GPPH recommends: A long profile is best positioned at its ends first. After checking the alignment of the component, intermediate clamping points can be added. This prevents the clamping force from fixing a previously unnoticed bend or twist in place.
Maximum table load capacity up to 4000kg
The compact dimensions of the PRO 1000x600mm do not mean limited load capacity. The table is supported by 4 legs made of 100x100x4mm profiles, each providing a load capacity of up to 1000kg. With the load properly and evenly distributed, this gives the table a maximum load capacity of up to 4000kg.
This allows the compact work surface to also be used with heavy components and structures, provided their weight is properly distributed across the worktop and support points.
Welding Table PRO 1200x800mm Specifications
- worktop dimensions: 1200x800mm – extended surface for profiles, frames and elongated components,
- worktop thickness: 15mm – stable surface for clamping components,
- material: S355J2+N steel – structural material used for the PRO series worktop,
- flatness tolerance: ≤0.15mm – even base across the entire work surface,
- holes: milled and chamfered – easier positioning of clamping tools,
- hole manufacturing tolerance: ±0.05mm – precise and repeatable positioning of tooling,
- engraved scale: 100x100mm – reference points for positioning profiles and structures,
- worktop reinforcement: rib system – increased rigidity of the work surface,
- leg profile: 100x100x4mm – stable base for the table,
- load capacity: 1000kg per leg – suitable for working with heavier components when the load is properly distributed.
The 1200mm length provides more space for arranging reference points along the profile, while the flatness of ≤0.15mm ensures an even surface for positioning it. For elongated frames, profiles and frameworks, the PRO 1200x800mm is worth considering, especially when the additional width of larger formats is not required.
Frequently Asked Questions
Why is the 1200x800mm worktop beneficial for long profiles?
The 1200mm length increases the distance between the outermost reference points, while the 800mm width leaves space for clamping tools on both sides of the workpiece.
How does rib reinforcement affect the table structure?
Ribs positioned underneath the worktop increase the rigidity of the work surface when clamping components.
Does the 800mm width allow clamping tools to be used on both sides of the workpiece?
Yes, for many elongated structures, 800mm leaves space for angle brackets, stops and clamps on both sides of the workpiece.
Opinie
Nie ma jeszcze żadnych recenzji