Welding table ECO 2000x1000 mm with hydraulic lifting system
GPPH welding tables with hydraulic lifting systems are professional tables with automatic adjustment of worktop height.
Thanks to it, you will quickly and easily reach the ideal working height of the table top, ensuring high working comfort.
Welding tables with hydraulic lifting systems are equipped with:
- overload valve preventing lifting too heavy loads;
- safety valve stopping the lowering in the case of rupture of the hydraulic lines;
- limit switches protecting against crushing or body injury.
Welding tables with hydraulic lifting system are available in five series of GPPH tabletops: PRO, PRO INOX, PLUS, PLUX INOX and ECO, and each of the series are available in 4 dimensions.
Each worktop is available with holes of system ϕ28 mm in the grids: 100x100 mm and diagonal, and in the holes of system ϕ16 mm in the grids: 50x50 mm, 100x100 mm and diagonal.
This offer applies to the welding table XWT with worktop ECO .
The welding table must be flat! Worktops of the ECO tables, having a thickness of 8mm, have a dense ribbing, which has an impact on the flat working surface. A massive and rigid substructure of the worktop ensures the highest stability during use and protection against deformation. Tolerance on flatness for the whole table is ±0.5 mm* and the tolerance of execution of the holes of the welding table is ±0.1 mm.
Hidrolik kaldırma sistemli tabanın teknik parametreleri:
- besleme gerilimi: 400 V
- devir sayısı [rpm]: 1400 rpm
- koruma sınıfı: IP54
- yalıtım sınıfı: F
- Maksimum yük kapasitesi [kg]: 3500
- Yük kaldırma süresi [s]: 30-40
- Maksimum masa yüksekliği [mm]: 1200
- Minimum masa yüksekliği [mm]: 550
- Asansör bagajının boyutları [mm] 1863x890
- Motor gücü [kW] 2.2
Bilgi kartı
- Serisi
- XWT
- Maksimum yük kapasitesi [kg]
- 3500
- Yük ile kaldırma süresi [s]
- 30-40
- Maksimum masa yüksekliği [mm]
- 1200
- Minimum masa yüksekliği [mm]
- 550
- Asansör bagajının boyutları
- 1863x890
- Motor gücü [kW]
- 2.2
- Masa için düzlük toleransı (tüm tezgah üzerinde)
- ±0,5 mm
- Delik üretim toleransı
- ±0,1 mm
Belirli Referanslar
- ean13
- 5905398595211