Welding Table SMART 12mm – 1500x1000mm

Description

Welding table SMART 12mm 1500x1000mm – economical workstation for everyday welding

Welding table GPPH SMART 12mm 1500x1000mm offers a compact work surface designed for preparing small and medium-sized structures. The tabletop made of S355J2+N steel, rib reinforcement, milled and chamfered holes, and an engraved scale create a functional workstation with a favourable price-to-capability ratio.

1500x1000mm surface for small and medium-sized structures

The 1500x1000mm format provides enough space for frames, brackets, bases, structures, and components with an elongated geometry. Along the longer axis of the tabletop, you can arrange several clamping points, while the 1000mm width makes it easier to reach the central part of the workstation.

SMART 12mm 1500x1000mm can serve as the main welding table in a smaller workshop or as an additional work surface in a facility equipped with several workstations. Its compact proportions help keep free space around the structure and do not take up the space typically required by larger tables.

S355J2+N material and reinforced construction

The work surface is based on a 12mm thick S355J2+N steel tabletop. This construction provides a stable base for the everyday positioning, clamping, and joining of parts during welding and assembly work.

The rigidity of the work surface is supported by ribs positioned underneath the tabletop. Their presence is particularly important for structures occupying a larger part of the 1500mm length and for clamping points distributed across several distant positions.

GPPH recommends: the 1500x1000mm format is a good choice if the largest parts you work with fit on the tabletop together with the required clamps, angle brackets, and stops. The 1000mm width provides convenient access to the structure without unnecessarily increasing the depth of the workstation.

Mounting holes on the 1500x1000mm surface

For elongated structures, it is important to be able to stabilize the workpiece at several points. The arrangement of milled and chamfered holes allows the position of clamping tools to be adapted to the length, geometry, and planned welding sequence of the part.

The tooling configuration can be adjusted as the workpiece changes. This makes the 1500x1000mm surface suitable for both one-off projects and the repeatable preparation of similar structures.

The table is available in Ø16 or Ø28 system, with a regular 100x100mm grid or diagonal layout. The appropriate variant should be selected according to the tools used and the type of work performed at the workstation.

Load capacity of the SMART 12mm welding table

The maximum load capacity of the SMART12 1500x1000mm table is 2000kg. This value applies to the entire table when the load is evenly distributed across the tabletop surface.

Engraved scale on the 1500x1000mm tabletop

The work surface features an engraved 100x100mm scale. It creates a clear reference layout that helps with the initial positioning of profiles, frames, and tools in different areas of the tabletop.

The markings are also useful when producing similar parts again. They make it easier to recreate the previously used position of the workpiece and clamping points without having to define the entire layout from scratch each time.

Side walls and clamping of three-dimensional components

The side walls of SMART12 feature two rows of holes. They allow clamping tools to be used beyond the main tabletop surface and expand the possibilities for preparing three-dimensional structures.

The side mounting points can be used for positioning vertical parts, supporting profiles, and securing tooling relative to the edge of the table. This allows the operator to use both the 1500x1000mm surface and the sides of the workstation.

Parameters of the SMART 12mm 1500x1000mm welding table

• work surface 1500x1000mm,
• tabletop made of 12mm thick S355J2+N steel,
• structure reinforced with stiffening ribs,
• maximum load capacity of 2000kg for the entire table,
• tabletop flatness tolerance ≤0.3mm after proper leveling,
• hole system Ø16 or Ø28,
• hole grid 100x100mm or diagonal layout,
• milled and chamfered mounting holes,
• engraved 100x100mm scale,
• two rows of holes in the side walls,
• legs made of 60x60x4mm profile,
• choice of legs with feet or wheels,
• compatibility with the appropriate SMART and PLUS tools.

The SMART12 1500x1000mm format combines a surface suitable for small and medium-sized structures with solutions designed for systematic clamping of components. Choose this variant if you need an economical workstation that provides convenient access to elongated parts.

Frequently Asked Questions

Does the 1000mm width make it easier to reach the central part of the table?
Yes. The proportions of the 1500x1000mm surface make it easy to reach the central part of the workstation without increasing its depth to the dimensions of wider variants.

How to choose the hole system for SMART 12mm 1500x1000mm?
The table is available in the Ø16 or Ø28 system. The choice should be matched to the tooling used and the method of clamping parts at the workstation.

Can SMART 12mm 1500x1000mm be used as an additional workstation?
Yes. Its compact proportions allow this variant to be used both as the main work surface in a smaller workshop and as an additional workstation in a larger facility.