Grinding-welding station
The grinding-welding station is intended for capturing and removing the dust and gases formed during grinding with a hand grinder or welding and metalworking operations. The station may be used with an exhaust fan or fan-powered filter equipment.

-
The GPPH grinding-welding station is available in three versions:
- Grinding-welding station - base
- Grinding-welding station - base with guards
- Grinding-welding station - base with top exhaust


- THE S.P.001 STATION CONTAINS
THE FOLLOWING COMPONENTS:
- Working table with a worktop made of 8 mm sheet
- Exhaust trough with drawers
- Two 230V plug sockets for connection of electrical power hand tools
- System for connection of workspace lighting
- Connector for exhaust hose
FEATURES - BASE:
S.P.001 | Cat. No.- The base is adapted for the installation of guards and a top exhaust system
- Connector Ø160mm installed in the side surface of the exhaust trough
- The air may be exhausted from the bottom through the table of exhaust trough
- Worktop made of 8mm sheet of the dimensions 1270x770 – assembly holes in the grid 100x100 of system 28 and additional holes for the exhaust for dust and gases
- Weight: 167 kg
- Recommended air flow: 3200 m3/h
- Resistance of flow: 250 Pa
FEATURES - BASE WITH GUARDS
S.O.001 | Cat. No.- Working surface guard
- Tilting doors - components of length exceeding the width of the table (1400 mm) can be placed on the working table
- Connector Ø160mm installed in the side surface of the exhaust trough
- The air may be exhausted from the bottom through the table of exhaust trough
- Worktop made of 8mm sheet of the dimensions 1270x770- assembly holes in the grid 100x100 of system 28 and additional holes for the exhaust for dust and gases
- Weight: 190 kg
- Recommended air flow: 3200 m3/h
- Resistance of flow: 250 Pa

- THE S.O.001 STATION CONTAINS
THE FOLLOWING COMPONENTS:
- Rear guard
- Tilting doors on the right and left side
- Working table with a worktop made of 8 mm sheet
- Exhaust trough with drawers
- Two 230V plug sockets for connection of electrical power
- System for connection of workspace lighting
- Connector for exhaust hose hand tools

- THE S.OG.001 STATION CONTAINS
THE FOLLOWING COMPONENTS:
- Working table with a worktop made of 8 mm sheet
- Exhaust trough with drawers
- Top exhaust system
- Tilting doors on the right and left side
- Two 230V plug sockets for connection of electrical power hand tools
- Work area lighting system
BASE WITH TOP EXHAUST
S.OG.001 | Cat. No.- Working surface guards
- Top exhaust system
- Tilting doors - components of length exceeding the width of the table (1400 mm) can be placed on the working table
- Connector Ø160mm installed in the side surface of the exhaust trough and top surface of the housing
- The air may be exhausted from the bottom through the table of exhaust trough and from the top through the holes in the housing.
- Worktop made of 8mm sheet of the dimensions 1270x770 - assembly holes in the grid 100x100 of system 28 and additional holes for the exhaust for dust and gases
- LED lighting
- Weight: 264 kg
- Recommended air flow: 3200 m3/h
- Resistance of flow: 250 Pa