Mobile or wall-mounted? With one or two arms? Or perhaps filtration and ventilation of the entire hall<\/strong> is already needed? It all depends on where and how the work is carried out.<\/p>\n\n\n\n If welding takes place at one or two workstations, a good solution is local extraction, which captures fumes as close as possible to the point where they are generated.<\/p>\n\n\n\n The GPPH range includes, among others, the IQ Aero Clean ECO<\/strong> series designed for such applications. These are mobile units with one or two extraction arms, suitable for small and medium-sized facilities. The wheeled design allows the unit to be easily moved wherever the work is currently being carried out.<\/p>\n\n\n\n If greater capacity is needed, it is worth looking at IQ Aero Clean Mobile<\/strong>. The mobile version provides flexibility in organizing the workstation, while the version with two arms allows two workstations to be handled simultaneously.<\/p>\n\n\n\n This is one of the more common questions when choosing a device. Extraction units are easiest to compare by airflow given in m\u00b3\/h, but the highest number does not necessarily mean the best solution.<\/p>\n\n\n\n IQ Aero Clean ECO<\/strong> provides a capacity of 1200 m\u00b3\/h. Mobile and Wall<\/strong> offer 3000 m\u00b3\/h and are designed for more demanding workstations.<\/p>\n\n\n\n With larger installations, the scale looks different. SUMMIT reaches 5000 m\u00b3\/h, while MASTER reaches 15 000 m\u00b3\/h<\/strong>. However, these units have different tasks. SUMMIT cleans the air within the hall, while MASTER can be part of an installation with multiple extraction points.<\/p>\n\n\n\n Therefore, instead of asking only \u201cwhat welding fume extraction power will be best?\u201d<\/strong>, it is worth checking how many workstations the device is supposed to serve, where the fumes are generated, and how intensive the work is.<\/p>\n\n\n\n If the workstation changes frequently, a mobile welding fume extraction system<\/strong> will be more practical. ECO or Mobile can be moved to wherever welding is currently taking place.<\/p>\n\n\n\n Przy sta\u0142ych stanowiskach warto rozwa\u017cy\u0107 IQ Aero Clean Wall<\/strong>. Urz\u0105dzenie montowane jest na \u015bcianie, wi\u0119c nie zajmuje przestrzeni na posadzce. Dost\u0119pne s\u0105 warianty z jednym lub dwoma ramionami.<\/p>\n\n\n\n In practice, the choice is simple: the mobile version provides greater flexibility, while Wall allows better use of space at a fixed workstation.<\/strong><\/p>\n\n\n\n If one welder is working and the fumes are generated mainly in one place, one arm is usually sufficient.<\/p>\n\n\n\n Two arms make sense when one device is intended to serve two workstations or two emission points. Such configurations are available in the ECO, Mobile and Wall series.<\/p>\n\n\n\n The length of the arm is also important. It should allow the extraction hood to be positioned as close as possible to the welding area, because too great a distance may reduce the effectiveness of fume capture.<\/p>\n\n\n\n A classic extraction arm will not always be the best solution.<\/p>\n\n\n\n If welding takes place in different areas across a larger table surface, it is worth considering IQ Air Flow<\/strong>. It is a welding extraction hood designed to remove fumes from the entire table surface, including the corners.<\/p>\n\n\n\n It can operate with a fan or be connected to an existing ventilation system. This is a convenient solution when constantly repositioning the arm would simply be inconvenient.<\/p>\n\n\n\n With several or a dozen workstations, individual extraction units may no longer be sufficient. In that case, solutions operating on a larger scale are needed.<\/p>\n\n\n\n IQ Aero Clean MASTER<\/strong> is a central filtration and ventilation unit designed for intensive operation. It can serve larger work zones or be part of an installation with multiple extraction points. Its capacity reaches 15 000 m\u00b3\/h<\/strong>.<\/p>\n\n\n\n IQ Aero Clean SUMMIT<\/strong> works differently. It is an industrial filtration column with a capacity of 5000 m\u00b3\/h<\/strong> that cleans the air directly within the hall. It draws in fumes and dust suspended in its upper areas, filters them, and then directs the cleaned air back into the room.<\/p>\n\n\n\n SUMMIT works particularly well where it is difficult to use conventional workstation extraction systems \u2013 e.g. at mobile workstations, with large structures or with a changing production layout. It can also complement existing workstation filtration and ventilation.<\/p>\n\n\n\n The simplest way to approach it is:<\/p>\n\n\n\n There is no single best welding fume extraction system. Before purchasing, it is worth answering a few questions: how many workstations operate simultaneously? Does their location change? Where is the most fume generated? Is local extraction needed, or does the problem concern the entire hall?<\/strong><\/p>\n\n\n\n Only then is it worth comparing specific devices and their parameters. A properly selected welding filtration and ventilation system<\/strong> should be adapted to the actual working conditions \u2013 so that it effectively deals with fumes exactly where needed.<\/p>","protected":false},"excerpt":{"rendered":" Welding fumes are one of those problems that can easily start to be treated as something normal in a workshop. A few welds, some fumes above the table, and the work continues. The problem is that the pollutants do not disappear \u2013 they remain airborne, move around the hall, and affect air quality.<\/p>","protected":false},"author":6,"featured_media":40035,"comment_status":"closed","ping_status":"closed","sticky":false,"template":"","format":"standard","meta":{"_acf_changed":false,"footnotes":""},"categories":[26],"tags":[],"class_list":["post-40033","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-aktualnosci"],"acf":[],"_links":{"self":[{"href":"https:\/\/gpph-group.com\/en_za\/wp-json\/wp\/v2\/posts\/40033","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/gpph-group.com\/en_za\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/gpph-group.com\/en_za\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/gpph-group.com\/en_za\/wp-json\/wp\/v2\/users\/6"}],"replies":[{"embeddable":true,"href":"https:\/\/gpph-group.com\/en_za\/wp-json\/wp\/v2\/comments?post=40033"}],"version-history":[{"count":5,"href":"https:\/\/gpph-group.com\/en_za\/wp-json\/wp\/v2\/posts\/40033\/revisions"}],"predecessor-version":[{"id":40266,"href":"https:\/\/gpph-group.com\/en_za\/wp-json\/wp\/v2\/posts\/40033\/revisions\/40266"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/gpph-group.com\/en_za\/wp-json\/wp\/v2\/media\/40035"}],"wp:attachment":[{"href":"https:\/\/gpph-group.com\/en_za\/wp-json\/wp\/v2\/media?parent=40033"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/gpph-group.com\/en_za\/wp-json\/wp\/v2\/categories?post=40033"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/gpph-group.com\/en_za\/wp-json\/wp\/v2\/tags?post=40033"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}<\/a>Local extraction \u2013 when fumes are generated in one place<\/strong><\/h2>\n\n\n\n
![\"\"](\"https:\/\/gpph-group.com\/wp-content\/uploads\/2026\/08\/image.png\")
<\/a>
<\/figcaption><\/figure>\n\n\n\n<\/a>What welding fume extraction capacity will be appropriate?<\/strong><\/h2>\n\n\n\n
<\/a>Wall-mounted or wheeled welding fume extraction?<\/strong><\/h2>\n\n\n\n
<\/a>One or two extraction arms?<\/strong><\/h2>\n\n\n\n
<\/a>Extraction arm or welding hood above the table?<\/strong><\/h2>\n\n\n\n
<\/a>When is workstation extraction not enough?<\/strong><\/h2>\n\n\n\n
<\/a><\/a>Which welding fume extraction system will be best?<\/strong><\/h2>\n\n\n\n
\n