The GPPH SMART 12mm 2400x1200mm welding table provides a larger work area for frames, panels, and extensive steel assemblies<\/strong>. The wide surface allows you to space out the clamping points and leave more room around the workpiece<\/strong>, while the S355J2+N steel construction, hole system, and scale support the daily organization of welding and assembly work.<\/p>\n\n\n

\n
$\"St\u00f3\u0142$ <\/a><\/figure><\/div>\n\n\n
2400x1200mm surface for larger structures<\/h2>\n\n\n\n
The 2400mm<\/strong> length provides space for frames, gates, fences, structures, and machine components<\/strong> that occupy a significant part of the workstation. The 1200mm width allows tooling to be arranged on both sides of the structure<\/strong> while leaving room for several widely spaced support points.<\/p>\n\n\n\n
The larger tabletop makes it possible to carry out subsequent stages of work without splitting the assembly between different areas of the workshop. The structure can remain in one setup during positioning, dimensional checks, tack welding, and subsequent welding operations<\/strong>.<\/p>\n\n\n\n
SMART 12mm 2400x1200mm is worth considering when the 2000x1000mm surface no longer provides enough space around the workpiece. The additional 400mm of length and 200mm of width provide greater freedom in arranging clamping points<\/strong> without having to move straight to the largest 3000x1480mm variant.<\/p>\n\n\n\n
S355J2+N steel and rib reinforcement of the larger work surface<\/h2>\n\n\n\n
The 12mm thick tabletop is made of S355J2+N steel<\/strong>, creating a surface designed for positioning, clamping, and joining larger components. It serves as a working base for regularly performed welding and assembly tasks.<\/p>\n\n\n\n
The work surface is supported from underneath by reinforcing ribs<\/strong>. In the 2400x1200mm size, their role is to strengthen the tabletop even when the frame occupies a large part of the workstation and the clamping tools are positioned close to opposite edges.<\/p>\n\n\n\n
\n
GPPH recommends:<\/strong> before fully tightening a larger frame, check the lengths of its sides and its diagonals. Start clamping from selected reference points, then proceed along the 2400mm surface, checking the position of subsequent structural elements<\/strong>.<\/p>\n<\/blockquote>\n\n\n\n
Mounting holes for wide clamping point spacing<\/h2>\n\n\n\n
Extensive frames require stabilization at multiple points<\/strong>, which is why access to mounting points in different areas of the 2400x1200mm tabletop is important. Clamps, angle brackets, stops, and pins can be arranged across different parts of the surface<\/strong>, using the milled and chamfered holes as clamping points matched to the outline of the structure being prepared.<\/p>\n\n\n\n
The clamping points can be arranged both along and across the structure<\/strong>. The outer areas of the work surface help define its outline, while the central zone remains available for additional supports or internal frame components.<\/p>\n\n\n\n
You can choose between the \u00d816 or \u00d828 system<\/strong>. The regular 100x100mm grid<\/strong> can be used for typical setups arranged parallel to the tabletop axes. For geometries requiring additional points outside this pattern, a diagonal configuration<\/strong> is available.<\/p>\n\n\n\n
Load capacity of the SMART 12mm welding table<\/h2>\n\n\n\n
The permissible load for the entire SMART 12mm 2400x1200mm table is up to 2000kg<\/strong>. Larger frames, materials, and tooling should be evenly distributed across the work surface<\/strong>.<\/p>\n\n\n
\n
$\"Welding$ <\/a><\/figure><\/div>\n\n\n
Engraved scale for checking larger frames<\/h2>\n\n\n\n
With widely spaced components, a common reference system covering the entire tabletop is needed. This function is provided by the engraved 100x100mm scale<\/strong>, which helps with the initial positioning of profiles relative to the edges and organizes the location of clamping points across different areas of the surface.<\/p>\n\n\n\n
The scale lines improve work organization when preparing repeatable frames and panels<\/strong>. Subsequent clamping points can be referenced to previously used markings without having to define the entire layout again.<\/p>\n\n\n\n
The scale makes positioning easier, but the final inspection of a larger structure should also include measuring the sides, angles, and diagonals using appropriate tools<\/strong>.<\/p>\n\n\n\n
Side walls for three-dimensional structures<\/h2>\n\n\n\n
Two rows of holes in the side walls allow you to clamp components beyond the main work surface<\/strong>. The side surfaces can be used for supporting profiles, positioning vertical parts, and mounting tools relative to the edge of the table<\/strong>.<\/p>\n\n\n\n
In the 2400x1200mm variant, the longer sides of the workstation increase the possibilities for preparing three-dimensional assemblies<\/strong>. Depending on the geometry of the structure, the tooling can be mounted on the top surface or along a selected side of the tabletop.<\/p>\n\n\n\n
Parameters of the SMART 12mm 2400x1200mm welding table<\/h2>\n\n\n\n
\n
work surface 2400x1200mm,<\/strong><\/li>\n\n\n\n
tabletop made of 12mm thick S355J2+N steel,<\/strong><\/li>\n\n\n\n
structure reinforced with stiffening ribs,<\/strong><\/li>\n\n\n\n
maximum load capacity of 2000kg for the entire table,<\/strong><\/li>\n\n\n\n
tabletop flatness tolerance \u22640.3mm after proper leveling,<\/strong><\/li>\n\n\n\n
hole system \u00d816 or \u00d828,<\/strong><\/li>\n\n\n\n
hole grid 100x100mm or diagonal layout,<\/strong><\/li>\n\n\n\n
milled and chamfered mounting holes,<\/strong><\/li>\n\n\n\n
engraved 100x100mm scale,<\/strong><\/li>\n\n\n\n
two rows of holes in the side walls,<\/strong><\/li>\n\n\n\n
legs made of 60x60x4mm profile,<\/strong><\/li>\n\n\n\n
choice of legs with feet or wheels,<\/strong><\/li>\n\n\n\n
compatibility with the appropriate SMART and PLUS tools.<\/strong><\/li>\n<\/ul>\n\n\n\n
The SMART 12mm 2400x1200mm surface provides space for larger frames and helps reduce the number of times the structure needs to be repositioned<\/strong> between successive stages of work. Choose this variant for assemblies that require widely spaced clamping points and more working space around the workpiece.<\/strong><\/p>\n\n\n\n
Frequently Asked Questions<\/h2>\n\n\n\n
Does SMART 12mm 2400x1200mm reduce the need to reposition the workpiece?<\/strong>
Yes. The larger surface allows you to complete more stages of work at a single workstation<\/strong> without frequently moving and re-referencing the structure.<\/p>\n\n\n\n
What does the 1200mm width provide when clamping larger frames?<\/strong>
The additional space on both sides of the structure allows the tooling to be spread out more widely<\/strong> and leaves room for supports and internal frame components.<\/p>\n\n\n\n
Can the side surfaces be used for three-dimensional structures?<\/strong>
Yes. The holes in the side walls create additional clamping points<\/strong> for profiles, vertical parts, and tooling positioned relative to the edge of the table.<\/p>","protected":false},"excerpt":{"rendered":"
St\u00f3\u0142 spawalniczy SMART 12mm 2400x1200mm \u2013 wi\u0119ksza powierzchnia do rozbudowanych ram St\u00f3\u0142 spawalniczy GPPH SMART 12mm 2400x1200mm zapewnia wi\u0119kszy obszar roboczy do ram, paneli i rozbudowanych zespo\u0142\u00f3w stalowych. Szeroka powierzchnia pozwala rozsun\u0105\u0107 punkty mocowania i pozostawi\u0107 wi\u0119cej przestrzeni wok\u00f3\u0142 detalu, a wykonanie ze stali S355J2+N wraz z systemem otwor\u00f3w i podzia\u0142k\u0105 wspiera codzienn\u0105 organizacj\u0119 prac […]<\/p>","protected":false},"featured_media":29521,"comment_status":"open","ping_status":"closed","template":"","meta":{"_acf_changed":false},"product_brand":[],"product_cat":[68,153,152,110],"product_tag":[],"class_list":{"0":"post-16750","1":"product","2":"type-product","3":"status-publish","4":"has-post-thumbnail","6":"product_cat-stoly-spawalnicze","7":"product_cat-ekonomiczne-stoly-spawalnicze","8":"product_cat-smart","9":"product_cat-2400x1200-mm","10":"product_shipping_class-stol-spawalniczy-2400","11":"pa_grawerowana-podzialka-tak-siatka-100x100-mm","12":"pa_grubosc-blatu-12-mm","13":"pa_grubosc-blatu-12mm","14":"pa_nogi-na-kolach","15":"pa_nogi-na-stopach","16":"pa_rozmiar-2400x1200mm","17":"pa_seria-smart12","18":"pa_siatka-100x100mm","19":"pa_siatka-diagonalna","20":"pa_system-fi16","21":"pa_system-fi28","22":"pa_tolerancja-plaskosci-03-mm","23":"pa_wymiar-stolu-2400x1200","25":"first","26":"instock","27":"sale","28":"taxable","29":"shipping-taxable","30":"purchasable","31":"product-type-variable","32":"has-default-attributes"},"acf":[],"_links":{"self":[{"href":"https:\/\/gpph-group.com\/en\/wp-json\/wp\/v2\/product\/16750","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/gpph-group.com\/en\/wp-json\/wp\/v2\/product"}],"about":[{"href":"https:\/\/gpph-group.com\/en\/wp-json\/wp\/v2\/types\/product"}],"replies":[{"embeddable":true,"href":"https:\/\/gpph-group.com\/en\/wp-json\/wp\/v2\/comments?post=16750"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/gpph-group.com\/en\/wp-json\/wp\/v2\/media\/29521"}],"wp:attachment":[{"href":"https:\/\/gpph-group.com\/en\/wp-json\/wp\/v2\/media?parent=16750"}],"wp:term":[{"taxonomy":"product_brand","embeddable":true,"href":"https:\/\/gpph-group.com\/en\/wp-json\/wp\/v2\/product_brand?post=16750"},{"taxonomy":"product_cat","embeddable":true,"href":"https:\/\/gpph-group.com\/en\/wp-json\/wp\/v2\/product_cat?post=16750"},{"taxonomy":"product_tag","embeddable":true,"href":"https:\/\/gpph-group.com\/en\/wp-json\/wp\/v2\/product_tag?post=16750"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}