![\"St\u00f3\u0142](\"https:\/\/gpph-group.com\/wp-content\/uploads\/2024\/07\/28_100x100_S_GPPH_SMART_15_300x148_v2.png\")
<\/a><\/figure><\/div>\n\n\n3000\u00d71480 mm surface for large structures<\/h2>\n\n\n\n
The largest work surface in this series is designed for long and wide frames, spatial structures, gates, racks, profile assemblies, and components requiring clamping at multiple points. <\/p>\n\n\n\n
The 3000 mm length allows longitudinal components to be arranged on a single workstation, while the 1480 mm width provides space for workpieces extending in several directions. The larger work area reduces the need to move the structure, re-establish reference points, and rebuild clamping setups during successive stages of work.<\/p>\n\n\n\n
The work surface can be divided into zones intended for preparing individual parts of the structure or successive assembly stages. Such a large format, however, requires space not only for the workstation itself, but also for safe passageways and operator access to clamping and welding points.<\/p>\n\n\n\n
Two 1500\u00d71480 mm tables forming a large workstation<\/h2>\n\n\n\n
The 3000\u00d71480 mm surface consists of two tables measuring 1500\u00d71480 mm each<\/strong>. Each welding table top<\/strong> in this configuration can form part of a shared workstation or serve as a separate surface for smaller projects.<\/p>\n\n\n\n When working as a single setup, both sections require precise alignment with each other. Leveling and aligning the tables is particularly important when positioning long components extending across the entire 3000\u00d71480 mm surface.<\/p>\n\n\n\n The ability to separate the configuration increases flexibility in organizing the workshop. Depending on current jobs, the tables can be used for one large structure or two independent tasks carried out at smaller workstations.<\/p>\n\n\n\n GPPH recommends:<\/strong> before setting up the 3000\u00d71480 mm configuration, determine the position of both tables and plan the access routes around the entire workstation. Also check whether the operator will be able to reach all areas of the structure without having to separate or move the work surfaces during the job.<\/p>\n\n\n\n Each welding tabletop<\/strong> is made of 15 mm thick S355J2+N steel<\/strong>. Two such surfaces form a base that allows large components to be positioned and extensive clamping setups to be created.<\/p>\n\n\n\n The structure beneath the tabletops is reinforced with stiffening ribs. Their purpose is to support the rigidity of both surfaces and transfer evenly distributed weight to the table structures. Large workpieces should be supported both along the length and across the width of the workstation.<\/p>\n\n\n\n The edges of the holes have been milled and chamfered. This makes it easier to work with pins, clamps, angle brackets, and stop elements when creating clamping setups that cover one or both parts of the configuration.<\/p>\n\n\n\n The SMART 15mm configuration can be selected with an \u00d816 or \u00d828<\/strong> hole system and a 100\u00d7100 mm grid or diagonal pattern<\/strong>. The system should match the diameter of the tooling being used, while the hole layout should suit the planned methods of positioning and clamping the components.<\/p>\n\n\n\n The number of mounting points available on the 3000\u00d71480 mm surface allows clamps, supports, and stop elements to be arranged across many areas. This makes it easier to stabilize long and wide parts of the structure at the same time.<\/p>\n\n\n\n The top surfaces are complemented by side walls with two rows of holes. They can be used when positioning vertical elements, brackets, and parts of spatial frames extending beyond the outline of the tabletops.<\/p>\n\n\n\n The complete SMART 15mm 3000\u00d71480 mm configuration can be loaded up to a maximum of 5000 kg<\/strong>, provided the weight is evenly distributed across both tables. This parameter applies to the complete workstation formed by the two sections.<\/p>\n\n\n15 mm thick tabletops made of S355J2+N steel<\/h2>\n\n\n\n
Mounting holes on the 3000\u00d71480 mm surface<\/h2>\n\n\n\n
Load capacity of the SMART 15mm welding table<\/h2>\n\n\n\n