The Welding Table PRO 2000x1000mm<\/strong> provides two metres of working length for positioning profiles, railings and longitudinal frames. The work surface is made of 15mm thick S355J2+N steel<\/strong>, with a rib system beneath the worktop, while the flatness tolerance is \u22640.15mm<\/strong>. This format is well suited when long components require several widely spaced reference points without moving the structure during subsequent assembly stages.<\/p>\n\n\n

\n
$\"Visible$ <\/a><\/figure><\/div>\n\n\n
\n\n\n\n
Two metres of working length for longitudinal structures<\/h2>\n\n\n\n
The 2000x1000mm<\/strong> worktop provides 2m\u00b2 of working surface<\/strong>, with proportions clearly suited to working with longer components. Its two-metre length allows reference points to be spaced widely along profiles, frames, railings, frameworks and other structures extending mainly along one axis.<\/p>\n\n\n\n
With such workpieces, the greater length reduces the need to reposition the structure in stages. The component can remain in one setup during referencing, geometry checks and the clamping of subsequent parts, which makes it easier to maintain the previously established position<\/strong>.<\/p>\n\n\n\n
The 1000mm<\/strong> width also leaves space for tooling on both sides of a long component. This allows squares, stops and clamps to be used without excessively increasing the overall depth of the workstation.<\/p>\n\n\n\n
\n\n\n\n
PRO 15mm worktop as a base for long components<\/h2>\n\n\n\n
The work surface is made of 15mm S355J2+N steel<\/strong> and additionally reinforced with a rib system beneath the worktop. With a length of 2000mm, this solution supports the stability of the surface used for referencing components at several widely spaced points.<\/p>\n\n\n\n
The flatness tolerance of \u22640.15mm<\/strong> is particularly important when working with long profiles. A workpiece supported in different areas of the worktop can be checked against one precise work surface before welding begins.<\/p>\n\n\n\n
\n
the holes have milled and chamfered edges<\/strong> designed for use with system tooling,<\/li>\n\n\n\n
the \u00b10.05mm hole manufacturing tolerance<\/strong> supports repeatable positioning of clamping tools,<\/li>\n\n\n\n
the engraved 100x100mm scale<\/strong> makes it easier to position successive reference points along the 2000mm length,<\/li>\n\n\n\n
beneath the work surface is a rib system that increases the rigidity of the worktop<\/strong>,<\/li>\n\n\n\n
the legs are made of 100x100x4mm<\/strong> structural profiles,<\/li>\n\n\n\n
each leg has a load capacity of 1000kg<\/strong>, provided the load is properly distributed.<\/li>\n<\/ul>\n\n\n\n
\n\n\n\n
GPPH recommends:<\/strong> For a long profile, first position the reference points as far apart as possible, then check the alignment of the component between them. Add intermediate clamping points only after checking the line to avoid locking in any existing deformation of the workpiece.<\/p>\n\n\n\n
\n\n\n\n
Maximum table load capacity up to 4000kg<\/h2>\n\n\n\n
The compact dimensions of the PRO 1000x600mm do not mean limited load capacity. The table is supported by 4 legs made of 100x100x4mm profiles<\/strong>, each providing a load capacity of up to 1000kg<\/strong>. With the load properly and evenly distributed, this gives the table a maximum load capacity of up to 4000kg<\/strong>.<\/p>\n\n\n\n
This allows the compact work surface to also be used with heavy components and structures, provided their weight is properly distributed across the worktop and support points.<\/p>\n\n\n
\n
$\"Nogi$ <\/a><\/figure><\/div>\n\n\n
\n\n\n\n
Welding Table PRO 2000x1000mm Specifications<\/h2>\n\n\n\n
\n
worktop dimensions:<\/strong> 2000x1000mm \u2013 2m\u00b2 of working surface designed for working with long profiles and frames,<\/li>\n\n\n\n
worktop thickness:<\/strong> 15mm \u2013 stable base for positioning and clamping components,<\/li>\n\n\n\n
material:<\/strong> S355J2+N steel \u2013 structural material used in the PRO series,<\/li>\n\n\n\n
flatness tolerance:<\/strong> \u22640.15mm \u2013 precise surface along the entire working length,<\/li>\n\n\n\n
holes:<\/strong> milled and chamfered \u2013 easier use with system tooling,<\/li>\n\n\n\n
hole manufacturing tolerance:<\/strong> \u00b10.05mm \u2013 repeatable positioning of clamping tools,<\/li>\n\n\n\n
engraved scale:<\/strong> 100x100mm \u2013 assists with establishing reference points along the structure,<\/li>\n\n\n\n
reinforcement:<\/strong> rib system beneath the worktop \u2013 additional rigidity of the work surface,<\/li>\n\n\n\n
leg profile:<\/strong> 100x100x4mm \u2013 stable support for the elongated worktop,<\/li>\n\n\n\n
load capacity:<\/strong> 1000kg per leg \u2013 suitable for working with heavier loads when they are properly distributed.<\/li>\n<\/ul>\n\n\n\n
The two-metre length allows reference points to be positioned over a long distance and longer components to be handled without constantly changing their position. The PRO 2000x1000mm is particularly well suited to profiles, railings, frames and frameworks where a long working length combined with a 1000mm width is essential.<\/strong><\/p>\n\n\n\n
\n\n\n\n
Frequently Asked Questions<\/h2>\n\n\n\n
What types of structures is the 2000x1000mm work surface best suited for?<\/h3>\n\n\n\n
The format is designed primarily for long profiles, railings, frames, frameworks and other longitudinal structures<\/strong> that require widely spaced reference points.<\/p>\n\n\n\n
What does the 2000mm length provide when working with a profile?<\/h3>\n\n\n\n
It allows clamping points to be positioned over a longer distance and reduces the need to move and re-reference the component<\/strong> between successive stages of work.<\/p>\n\n\n\n
How can the 100x100mm scale be used when working with long structures?<\/h3>\n\n\n\n
The engraving can serve as a reference point for successive clamping points positioned along the profile<\/strong>, making it easier to control their position and reproduce the configuration.<\/p>","protected":false},"excerpt":{"rendered":"
St\u00f3\u0142 spawalniczy PRO 2000x1000mm – dwa metry przestrzeni do d\u0142ugich konstrukcji\u00a0 St\u00f3\u0142 spawalniczy PRO 2000x1000mm zapewnia dwa metry d\u0142ugo\u015bci roboczej do bazowania profili, balustrad i pod\u0142u\u017cnych ram. Powierzchni\u0119 tworzy stal S355J2+N o grubo\u015bci 15mm, pod blatem pracuje system \u017ceber, a tolerancja p\u0142asko\u015bci wynosi \u22640,15mm. Taki format sprawdza si\u0119, gdy d\u0142ugie elementy wymagaj\u0105 kilku oddalonych punkt\u00f3w […]<\/p>","protected":false},"featured_media":40753,"comment_status":"open","ping_status":"closed","template":"","meta":{"_acf_changed":false},"product_brand":[],"product_cat":[425,68,85,111],"product_tag":[],"class_list":{"0":"post-14201","1":"product","2":"type-product","3":"status-publish","4":"has-post-thumbnail","6":"product_cat-pro","7":"product_cat-stoly-spawalnicze","8":"product_cat-tradycyjne","9":"product_cat-2000x1000-mm","10":"product_shipping_class-stol-spawalniczy-2000","11":"pa_grawerowana-podzialka-tak-siatka-100x100-mm","12":"pa_grubosc-blatu-15mm","13":"pa_nogi-na-stopach","14":"pa_nogi-na-kolach","15":"pa_nosnosc-1000kg-noga","16":"pa_otwory-frezowane-i-fazowane","17":"pa_profil-nog-100x100x4-mm","18":"pa_rozmiar-2000x1000mm","19":"pa_seria-pro","20":"pa_siatka-100x100mm","21":"pa_siatka-50x50mm","22":"pa_siatka-diagonalna","23":"pa_system-fi28","24":"pa_system-fi16","25":"pa_tolerancja-plaskosci-015-mm-mniejsze-lub-rowne-0-15-mm","26":"pa_tolerancja-wykonania-otworow-005-mm","27":"pa_wzmocnienie-zebrami-tak","29":"first","30":"instock","31":"sale","32":"taxable","33":"shipping-taxable","34":"purchasable","35":"product-type-variable","36":"has-default-attributes"},"acf":[],"_links":{"self":[{"href":"https:\/\/gpph-group.com\/en\/wp-json\/wp\/v2\/product\/14201","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/gpph-group.com\/en\/wp-json\/wp\/v2\/product"}],"about":[{"href":"https:\/\/gpph-group.com\/en\/wp-json\/wp\/v2\/types\/product"}],"replies":[{"embeddable":true,"href":"https:\/\/gpph-group.com\/en\/wp-json\/wp\/v2\/comments?post=14201"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/gpph-group.com\/en\/wp-json\/wp\/v2\/media\/40753"}],"wp:attachment":[{"href":"https:\/\/gpph-group.com\/en\/wp-json\/wp\/v2\/media?parent=14201"}],"wp:term":[{"taxonomy":"product_brand","embeddable":true,"href":"https:\/\/gpph-group.com\/en\/wp-json\/wp\/v2\/product_brand?post=14201"},{"taxonomy":"product_cat","embeddable":true,"href":"https:\/\/gpph-group.com\/en\/wp-json\/wp\/v2\/product_cat?post=14201"},{"taxonomy":"product_tag","embeddable":true,"href":"https:\/\/gpph-group.com\/en\/wp-json\/wp\/v2\/product_tag?post=14201"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}

Frequently Asked Questions<\/h2>\n\n\n\n

What types of structures is the 2000x1000mm work surface best suited for?<\/h3>\n\n\n\nThe format is designed primarily for long profiles, railings, frames, frameworks and other longitudinal structures<\/strong> that require widely spaced reference points.<\/p>\n\n\n\n

What types of structures is the 2000x1000mm work surface best suited for?<\/h3>\n\n\n\n
The format is designed primarily for long profiles, railings, frames, frameworks and other longitudinal structures<\/strong> that require widely spaced reference points.<\/p>\n\n\n\n