In the PRO 1200x1200mm Welding Table<\/strong>, the square work surface is made of 15mm S355J2+N steel<\/strong>, while the rib system provides additional rigidity to the worktop. The flatness tolerance of \u22640.15mm<\/strong> supports precise positioning of structures that occupy space along both axes. It is well suited when a wide frame, base or three-dimensional structure requires a similar amount of space in both directions and flexible arrangement of clamping tools.<\/p>\n\n\n

\n
$\"Visible$ <\/a><\/figure><\/div>\n\n\n
\n\n\n\n
Square 1200x1200mm work surface for wide structures<\/h2>\n\n\n\n
The 1200x1200mm<\/strong> worktop provides 1.44m\u00b2 of working surface<\/strong> with equal length and width. This layout is well suited to wide frames, bases, structural sections, frameworks and assemblies that require plenty of space both along and across the workstation.<\/p>\n\n\n\n
R\u00f3wne wymiary obu bok\u00f3w u\u0142atwiaj\u0105 rozmieszczenie narz\u0119dzi mocuj\u0105cych wok\u00f3\u0142 detalu bez wyra\u017anego podporz\u0105dkowania pracy jednej osi. Przy wi\u0119kszych ramach mo\u017cna pozostawi\u0107 wi\u0119cej miejsca na stopery, k\u0105towniki i zaciski<\/strong> po kilku stronach konstrukcji jednocze\u015bnie.<\/p>\n\n\n\n
The 1200x1200mm welding worktop is also well suited to three-dimensional components that need to be rotated or positioned in different directions. The greater width reduces the need to move the workpiece simply to gain access to another clamping point.<\/p>\n\n\n\n
\n\n\n\n
15mm worktop and S355J2+N steel for stable positioning<\/h2>\n\n\n\n
15mm thickness and S355J2+N steel<\/strong> form the structural base of the square PRO 1200x1200mm worktop. The surface is reinforced with ribs underneath, helping to maintain adequate rigidity when clamping points are positioned far apart.<\/p>\n\n\n\n
Every area of this worktop is subject to a flatness tolerance of \u22640.15mm<\/strong>. This is particularly important for wide structures supported at several points simultaneously, as all reference points use the same precise work surface.<\/p>\n\n\n\n
\n
the milled and chamfered holes<\/strong> are prepared for use with the clamping system,<\/li>\n\n\n\n
their manufacturing accuracy is defined by a tolerance of \u00b10.05mm<\/strong>,<\/li>\n\n\n\n
the engraved 100x100mm grid<\/strong> provides a coordinate system useful when working along two axes,<\/li>\n\n\n\n
the larger square surface is stabilized from underneath by a rib system<\/strong>,<\/li>\n\n\n\n
the structural profile of the legs measures 100x100x4mm<\/strong>,<\/li>\n\n\n\n
the permissible load on a single leg is 1000kg<\/strong>, provided the weight is properly distributed.<\/li>\n<\/ul>\n\n\n\n
\n\n\n\n
GPPH recommends:<\/strong> Position the corners of the large square frame first, then compare both diagonals. Only after confirming the geometry should you clamp the sections between the corners.<\/p>\n\n\n\n
\n\n\n\n
Maximum table load capacity up to 4000kg<\/h2>\n\n\n\n
The compact dimensions of the PRO 1000x600mm do not mean limited load capacity. The table is supported by 4 legs made of 100x100x4mm profiles<\/strong>, each providing a load capacity of up to 1000kg<\/strong>. With the load properly and evenly distributed, this gives the table a maximum load capacity of up to 4000kg<\/strong>.<\/p>\n\n\n\n
This allows the compact work surface to also be used with heavy components and structures, provided their weight is properly distributed across the worktop and support points.<\/p>\n\n\n
\n
$\"Nogi$ <\/a><\/figure><\/div>\n\n\n
\n\n\n\n
Welding Table PRO 1200x1200mm Specifications<\/h2>\n\n\n\n
\n
worktop dimensions:<\/strong> 1200x1200mm \u2013 1.44m\u00b2 of square work surface for wide frames and three-dimensional structures,<\/li>\n\n\n\n
worktop thickness:<\/strong> 15mm \u2013 stable base for regular welding and assembly work,<\/li>\n\n\n\n
material:<\/strong> S355J2+N steel \u2013 structural material used in the PRO series,<\/li>\n\n\n\n
flatness tolerance:<\/strong> \u22640.15mm \u2013 precise work surface along both axes of the worktop,<\/li>\n\n\n\n
holes:<\/strong> milled and chamfered \u2013 easier positioning of system tools,<\/li>\n\n\n\n
hole manufacturing tolerance:<\/strong> \u00b10.05mm \u2013 repeatable positioning of tooling,<\/li>\n\n\n\n
engraved scale:<\/strong> 100x100mm \u2013 assists with positioning and checking the placement of workpieces,<\/li>\n\n\n\n
reinforcement:<\/strong> rib system beneath the worktop \u2013 increased structural rigidity,<\/li>\n\n\n\n
leg profile:<\/strong> 100x100x4mm \u2013 stable base for the workstation,<\/li>\n\n\n\n
load capacity:<\/strong> 1000kg per leg \u2013 suitable for working with heavier loads when the weight is evenly distributed.<\/li>\n<\/ul>\n\n\n\n
The square 1200x1200mm worktop provides greater flexibility when working with structures extending in two directions, while flatness of \u22640.15mm ensures an even base for positioning them. The PRO 1200x1200mm format is worth considering for wide frames, bases and components that require easy access to clamping points from several sides.<\/strong><\/p>\n\n\n\n
\n\n\n\n
Frequently Asked Questions<\/h2>\n\n\n\n
How much space for clamping tools does the 1200x1200mm work surface provide?<\/h3>\n\n\n\n
The worktop has an area of 1.44m\u00b2<\/strong>, and its square proportions allow tooling to be positioned around the structure along both axes.<\/p>\n\n\n\n
Is the PRO 1200x1200mm suitable for three-dimensional structures?<\/h3>\n\n\n\n
Yes, the large width and length make it easier to position components that extend in several directions<\/strong> and to change their orientation during work.<\/p>\n\n\n\n
How can you check the geometry of a wide frame on this worktop?<\/h3>\n\n\n\n
After initially positioning the corners, it is worth checking the diagonals of the structure<\/strong> before increasing the clamping force and making the welds.<\/p>","protected":false},"excerpt":{"rendered":"
St\u00f3\u0142 spawalniczy PRO 1200x1200mm – kwadratowa powierzchnia do wi\u0119kszych konstrukcji W stole spawalniczym PRO 1200x1200mm kwadratowa powierzchnia robocza powstaje z 15mm stali S355J2+N, a system \u017ceber odpowiada za dodatkowe usztywnienie blatu. Tolerancja p\u0142asko\u015bci \u22640,15mm wspiera dok\u0142adne bazowanie konstrukcji zajmuj\u0105cych miejsce w obu osiach. Sprawdza si\u0119, gdy szeroka rama, podstawa lub konstrukcja przestrzenna wymaga podobnej ilo\u015bci […]<\/p>","protected":false},"featured_media":40689,"comment_status":"open","ping_status":"closed","template":"","meta":{"_acf_changed":false},"product_brand":[],"product_cat":[425,68,114,85],"product_tag":[],"class_list":{"0":"post-14071","1":"product","2":"type-product","3":"status-publish","4":"has-post-thumbnail","6":"product_cat-pro","7":"product_cat-stoly-spawalnicze","8":"product_cat-1200x1200-mm","9":"product_cat-tradycyjne","10":"product_shipping_class-stol-spawalniczy-2000","11":"pa_grawerowana-podzialka-tak-siatka-100x100-mm","12":"pa_grubosc-blatu-15mm","13":"pa_nogi-na-kolach","14":"pa_nogi-na-stopach","15":"pa_nosnosc-1000kg-noga","16":"pa_otwory-frezowane-i-fazowane","17":"pa_profil-nog-100x100x4-mm","18":"pa_rozmiar-1200x1200mm","19":"pa_seria-pro","20":"pa_siatka-100x100mm","21":"pa_siatka-50x50mm","22":"pa_siatka-diagonalna","23":"pa_system-fi16","24":"pa_system-fi28","25":"pa_tolerancja-plaskosci-015-mm-mniejsze-lub-rowne-0-15-mm","26":"pa_tolerancja-wykonania-otworow-005-mm","27":"pa_wzmocnienie-zebrami-tak","29":"first","30":"instock","31":"sale","32":"taxable","33":"shipping-taxable","34":"purchasable","35":"product-type-variable","36":"has-default-attributes"},"acf":[],"_links":{"self":[{"href":"https:\/\/gpph-group.com\/en\/wp-json\/wp\/v2\/product\/14071","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/gpph-group.com\/en\/wp-json\/wp\/v2\/product"}],"about":[{"href":"https:\/\/gpph-group.com\/en\/wp-json\/wp\/v2\/types\/product"}],"replies":[{"embeddable":true,"href":"https:\/\/gpph-group.com\/en\/wp-json\/wp\/v2\/comments?post=14071"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/gpph-group.com\/en\/wp-json\/wp\/v2\/media\/40689"}],"wp:attachment":[{"href":"https:\/\/gpph-group.com\/en\/wp-json\/wp\/v2\/media?parent=14071"}],"wp:term":[{"taxonomy":"product_brand","embeddable":true,"href":"https:\/\/gpph-group.com\/en\/wp-json\/wp\/v2\/product_brand?post=14071"},{"taxonomy":"product_cat","embeddable":true,"href":"https:\/\/gpph-group.com\/en\/wp-json\/wp\/v2\/product_cat?post=14071"},{"taxonomy":"product_tag","embeddable":true,"href":"https:\/\/gpph-group.com\/en\/wp-json\/wp\/v2\/product_tag?post=14071"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}

Frequently Asked Questions<\/h2>\n\n\n\n

How much space for clamping tools does the 1200x1200mm work surface provide?<\/h3>\n\n\n\nThe worktop has an area of 1.44m\u00b2<\/strong>, and its square proportions allow tooling to be positioned around the structure along both axes.<\/p>\n\n\n\n

How much space for clamping tools does the 1200x1200mm work surface provide?<\/h3>\n\n\n\n
The worktop has an area of 1.44m\u00b2<\/strong>, and its square proportions allow tooling to be positioned around the structure along both axes.<\/p>\n\n\n\n